登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 土木建筑类 > 给排水科学与工程 > 正文

安徽铜陵市四水厂给水工程设计毕业论文

 2020-04-15 09:04  

摘 要

Abstract 9

第一部分 设计说明 10

第一章 概述 10

1.1 设计任务 10

1.1.1工程概况 10

1.1.2设计要求 10

1.2设计内容 10

1.2.1给水系统水量及工程规模确定 10

1.2.2自来水厂设计 10

1.2.4输水管设计 11

1.2.5配水管网设计 11

第三章 自来水厂设计说明 12

3.1给水处理流程的确定 12

3.2给水处理构筑物与设备形式选择 12

第二部分 设计计算 18

第四章 给水管网设计计算 18

4.1设计用水量计算 18

4.1.1城市最高日用水量预测 18

4.1.2设计用水量变化及其调节计算 18

4.2设计流量分配与管径设计 19

4.2.1节点设计流量计算 19

4.2.2管段设计流量计算 21

4.3泵站扬程计算 22

4.3.1设计工况 22

4.3.2泵站扬程设计 24

4.4管网设计校核 24

4.4.1事故工况校核 24

4.4.2消防工况校核 26

第五章 取水工程设计 29

5.1取水构筑物位置和形式的选择 29

5.2进水间的设计计算 29

5.2.1进水孔和格栅的设计 29

5.2.3格网的设计 30

5.2.4进水间高程布置与计算 31

5.2.5进水间、吸水间平面布置 31

5.2.7起吊装备 32

5.3输水干管设计 32

5.4取水泵房的设计计算 32

5.4.1设计流量和扬程的确定 32

5.4.2初选水泵和电机 33

5.4.3吸水管路和压水管路的计算i 34

5.3.5泵房高程布置 35

5.3.6附属设备 35

第六章 自来水厂设计计算 37

6.1加药间设计计算 37

6.1.1药剂的选择及确定用量 37

6.1.2溶液池 37

6.1.3溶解池 37

6.1.4投药和计量设备 37

6.1.5加药间和药库的设计 38

6.3.2配水井设计计算 38

6.2.1设计参数 38

6.2.2设计计算 38

6.3混合设备设计计算 39

6.3.2设计计算 39

6.4网格絮凝池设计计算 40

6.4.1设计水量 40

6.4.2絮凝池有效容积 40

6.4.3过水洞流速 41

6.4.4内部水头损失计算 42

6.4.5 GT值 43

6.5平流沉淀池设计计算 43

6.5.1设计参数 43

6.5.2设计水量Q 43

6.5.3池体尺寸 43

6.5.4进水穿墙孔 44

6.5.5出水系统 44

6.5.6排泥设备 45

6.6臭氧发生装置 46

6.6.1设计参数 46

6.6.3接触装置 46

6.6.4臭氧化气流量 47

6.6.5微孔扩散板个数n 47

6.6.6臭氧发生器的工作压力Hy 47

6.7上向流活性炭滤池 48

6.7.1设计水量 48

6.7.2池体设计 48

6.7.3配水系统 49

6.7.4滤池各种管渠计算 50

6.7.5反冲洗系统 50

6.8 V型滤池设计计算 51

6.8.1设计参数 51

6.8.2滤池池体设计 51

6.8.3滤池各种管渠计算 52

6.8.4配水配气系统 53

6.8.5V型槽设计 53

6.8.6排水集水槽的相关计算 54

6.8.7冲洗水泵计算 55

6.8.8鼓风机房 56

6.9消毒 57

6.9.1设计参数 57

6.9.2设计计算 57

6.9.3加氯间和氯库的布置 57

6.10清水池设计 57

6.10.2配管及布置 58

6.10.3清水池的布置 58

第七章 二泵站设计 60

7.1初选水泵和电机 60

7.1.1水泵性能 60

7.1.2配套电机性能 60

7.1.3水泵外形尺寸 60

7.1.4水泵安装尺寸 60

7.2水泵间布置 60

7.2.1水泵基础设计 60

7.2.2泵房平面尺寸设计 60

7.3吸水管路和压水管路的计算 61

7.3.1吸水管路 61

7.3.2压水管路 61

7.4吸水井设计 61

7.4.1吸水井高程 61

7.4.2吸水井平面尺寸 62

7.6泵房高程布置 62

7.6.1水泵最大安装高度 62

7.6.2起重设备 62

7.6.3泵房高度 62

第八章 泥处理系统 63

8.2 设计计算 63

8.3 排泥池设计 64

8.4 浓缩池设计 64

8.4.2 设计计算 64

8.5 污泥脱水机房设计 65

8.5.1设计参数 65

8.5.2设计计算 65

第九章 水厂总体布置 67

9.1 净水厂平面布置 67

9.1.2 水厂附属建筑物的设计 67

9.2 水厂管线设计 68

9.2.1 连接管道设计 68

9.2.2 净水构筑物水头损失 68

9.2.3 水厂高程布置 69

参考文献 70

摘 要

自来水厂是城市重要的服务性基础设施,直接关系到人民的生活与生产。本设计根据设计任务书原始资料,对安徽铜陵市四水厂给水工程进行了设计。工程设计范围包括自来水厂、泵站及管网三个部分。自来水厂规模为30万立方米/日,取水水源为长江。根据水源水质情况,经过方案比选,确定水厂采用混凝、沉淀、臭氧氧化、活性炭吸附、过滤、消毒的净水工艺及各处理单元的构筑物形式,即原水经管式静态混合器进入网格絮凝池、平流沉淀池、臭氧接触池、上向流活性炭滤池、V型滤池,经液氯消毒后进清水池,由二级泵站进入城市供水管网。供水管网采用环状网,保证了供水可靠性,又力求管线最短距离,节约经济。本设计主要内容有:供水管网设计,水泵及泵站设计,净水工艺流程方案比选及构筑物设计,排泥处理设计,水厂平面布置,工艺流程高程布置,水厂内生产管线、排水管线、雨污水管线布置等。

关键词:管网 自来水厂 水处理常规工艺 臭氧活性炭工艺

Design of Water Supply Engineering in Central District B, Guangdong Province

Abstract

Water treatment plant are important service infrastructure in cities, which directly affect people's life and production. According to the original data of the design task book, the water supply project of the Fourth Water Plant in Tongling City, Anhui Province was designed. The engineering design content includes three parts: water works, pumping stations and pipeline network. The water treatment plant are 300,000 cubic meters per day. The source of water intake is the Yangtze River. According to the water quality of the source water and the comparison of the schemes, it is determined that the water purification process of coagulation, precipitation, ozone oxidation, activated carbon adsorption, filtration and disinfection and the structure of each treatment unit are adopted in the water plant. That is, raw water enters the grid flocculation tank, advection sedimentation tank, ozone contact tank, upward flow activated carbon filter and V-type filter through the static pipe mixer, and then enters the clean water tank after liquid chlorine disinfection. The secondary pumping station enters the urban water supply network. The water supply network adopts ring network, which ensures the reliability of water supply, and strives for the shortest distance of pipeline and saves economy. The main contents of this design are: water supply network design, pump and pumping station design, water purification process scheme comparison and structure design, sludge treatment design, water plant layout, process elevation layout, production pipeline, drainage pipeline, rain and sewage pipeline layout in water plant, etc.

Key Words: pipe network; Water purification plant; Conventional processes for water treatment; Ozone activated carbon process

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图