登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 矿业类 > 消防工程 > 正文

七层商业广场防排烟系统设计毕业论文

 2020-04-15 09:04  

摘 要

防烟排烟工程主要目的是防止火灾产生大量的烟尘粒子、CO等有害气体,阻止烟气的迅速蔓延,确保人员疏散和改善救火条件,现代防排烟常设置机械排烟以及送风系统,进行机械排烟或正压送风排烟,对建筑进行防烟隔离,或设计自然通风口等[1]

近年来,国际上在防排烟技术领域的主要工作包括:

(1)火灾烟气运动的数值模拟[7]

(2)防排烟系统性能的优化设计与评价,包括基于性能的设计原则[7]

(3)防排烟系统技术参数及设备的研究与开发[7]

目前,我国防排烟技术存在两个主要问题:有效维护和管理防排烟系统产品质量;非商定的防烟系统设计和验收规范。现有的防火设计规范与防烟设计规定不完全一致。目前,防烟工程也需要取得一定的进展,制定和完善反烟系统的检验标准。

关键词:防排烟工程、机械排烟、正压送风排烟、自然排烟。

Abstract

The main purpose of smoke prevention and exhaust engineering is to prevent fires from producing a large number of smoke particles, CO and other harmful gases, to prevent the rapid spread of these smoke, to ensure the safe evacuation of personnel and improve fire fighting conditions. To isolate the building from smoke; Design natural vents, etc[1].

At present, most high-rise buildings and underground commercial buildings adopt mechanical smoke control technology as the main means.

includes :

  1. numerical simulation of fire smoke movement[7];
  2. optimization design and evaluation of smoke prevention and exhaust system performance, including design principles based on performance[7].

(3) research and development of technical parameters and equipment of smoke prevention and exhaust system[7].

At present, there are two main problems in our national defense smoke emission technology: to effectively maintain and manage the quality of smoke emission system products; Non-agreed-upon specifications for the design and acceptance of smoke prevention systems. Existing fire design specifications and smoke design regulations are not completely consistent. At present, the anti - smoke project also needs to make certain progress, the development and improvement of anti - smoke system inspection standards.

Keywords: smoke prevention and exhaust engineering, mechanical smoke exhaust, positive pressure air exhaust, natural smoke exhaust.

目录

摘要 I

ABSTRACT II

第一章 烟气以及防排烟概述 1

1.1 烟气及防排烟系统介绍 1

1.11 烟气简介 1

1.12 防排烟系统介绍 1

1.2 防火分区 3

1.2.1防火分区的定义 3

1.2.2如何划分防火分区 防火分区划分的依据 3

1.3 防烟分区 3

1.3.1防烟分区的定义 4

1.3.2如何划分防烟分区 防烟分区划分的依据 4

第二章 工程概况 5

2.1 设计依据 5

2.2 通风防排烟系统要求 5

2.3 消防控制 6

2.4 管材方面 7

2.5 设备安装及节能环保 8

第三章 防排烟系统设计 9

3.1地下一层设计部分 9

3.1.1 划分依据以及排烟系统采用方式 9

3.1.2 设计原则 10

3.1.3 计算平时排风、排烟、补风量 10

3.2 地上一层防烟分区划分部分 11

3.3 地上二层至六层(标准层)防烟分区划分部分 12

3.4 排烟口数量确定 13

3.5 排烟量计算 16

第四章 防烟计算过程 18

4.1防烟设计规范 18

4.2 加压送风计算 18

第五章 风机选型 18

5.1 风机功率计算 21

5.2 通风管道水力计算 22

5.2.1计算方法 22

5.2.2计算公式 22

5.3 加压送风系统布置位置确定 23

5.4风机选型 23

5.5风机选型与机房布置大样图纸简介 24

总结 25

参考文献 26

致谢 27

第一章 烟气以及防排烟概述

1.1 烟气及防排烟系统介绍

1.11 烟气简介

烟气是火灾燃烧过程中的重要产品,美国材料与试验协会(ASTM)将烟气定义为固体或液体悬浮颗粒以及物质燃烧或分解时释放的高温气体,美国消防会议《中庭建筑防烟设计指南》(NFPA 92B)中对烟雾的定义是在上述定义的基础上添加“和任何混入空气”的字样 [1]

火灾初期往往处于燃料控制的不完全燃烧阶段。除此之外,在不完全燃烧产生的烟道气体成分中,还可以产生一氧化碳、有机磷、碳氢化合物、多环芳烃、焦油、碳屑等固体颗粒,颗粒物的性质随可燃物的性质变化很大。多环芳烃(PAH)和聚乙烯(PE)是火焰中烟灰颗粒的前驱体,使火焰呈黄色。这些小颗粒的直径为0.01 ~ 10um,在温度和氧浓度足够高的前提下,这些烟灰颗粒在火焰中进一步氧化,否则将直接离开火焰区成为烟灰,火灾初期火焰燃烧产生的烟道气体颗粒几乎都是由固体颗粒组成,其中一些是在高热通量作用下与固体分离的灰,而且大多数粒子都处于低氧浓度,烟气颗粒都是可燃的,一旦被点燃,在通风不畅的受限空间内甚至可能引起爆炸[1]

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图