登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 土木建筑类 > 给排水科学与工程 > 正文

天长市啤酒厂3000吨污水处理工程设计毕业论文

 2022-04-11 08:04  

论文总字数:25280字

摘 要

本设计为天长市啤酒厂污水处理工程设计,处理规模为3000m3/d。进水水质为:BOD=800mg/L,COD=1500mg/L,SS=600mg/L。出水水质为:BOD=20mg/L,COD=100mg/L,SS=70mg/L。

通过对国内外不同污水处理工艺的比较与分析,结合本工程的具体情况,最终选择厌氧膨胀颗粒污泥床(简称EGSB)和周期循环活性污泥法(简称CASS)作为本工程的处理工艺。目前,厌氧-好氧组合工艺是我国处理啤酒废水最为常用的方法。一方面,厌氧处理过程运行成本较低,产泥量少,产生的沼气具有较好的经济效益; 另一方面,高浓度酒精废水经厌氧处理达不到排放标准,需要好氧法进行后续处理。

污水处理工艺流程为:进水→粗格栅→调节池(污水提升泵)→竖流式沉淀池→集水井→EGSB反应器→CASS生化池→出水

初沉污泥处理工艺流程为:贮泥池→污泥泵→带式压滤机→泥饼外运。

剩余污泥处理工艺流程为:集泥井→污泥泵→浓缩压滤一体机→烘干机→泥饼外运。

关键词:啤酒废水 EGSB CASS 污泥处理

The Engineering Design of the Treatment of 3000 tons of sewage in Tianchang brewery

Abstract

This project is a design of the sewage treatment plant of Tianchang brewery, the scale is 3000m3/d.The influent quality is shown as follow: BOD5=800mg/L, CODcr =1500mg/L,SS=600mg/L.The effluent quality is shown as follow: BOD5=20mg/L, CODcr =100mg/L,SS=70mg/L.

By comparing and analyzing different wastewater treatment processes at home and abroad, combining with the specific circumstances of this project, an EGSB process and a CASS process is chosen as the final process of this project.At present, the combination of anaerobic process and aerobic process is the most commonly used method for the treatment of beer wastewater in our country.On the one hand, the operation cost of anaerobic treatment process and the sludge production is relatively low.the biogas produced in the anaerobic treatment process has good economic benefits.On the other hand, the anaerobic treatment of high concentration of alcohol wastewater can not reach the emission standards, the wastewater needs aerobic process for subsequent treatment.

Sewage treatment process is: inflow→coarse screen→water regulating pool (sewage lift pump)→vertical sedimentation basin→Collecting well→Expanded Granular Sludge Blanket Reactor→ Cyclic Activated Sludge System→ effluent.

Primary settling sludge treatment process is: sludge storage tank→sludge pump → belt pressure filter→transport of mud cake.

Primary settling sludge treatment process is: set mud well→sludge pump → concentrate filter press machine→sludge dryer→transport of mud cake.

 

Key Words: beer wastewater; Expanded Granular Sludge Blanket Reactor; Cyclic Activated Sludge System; sludge treatment

目录

摘 要 1

Abstract 2

第一章 总论 7

1.1工程内容 7

1.2拟采用的研究手段 8

1.3主要设计依据 8

1.4毕业设计进程安排 8

第二章 污水处理构筑物的选择 9

2.1工艺方案比选 9

2.1.1厌氧处理工艺 9

2.1.2好氧处理工艺 10

2.2工艺流程 11

2.3出水水质分析 11

第三章 污水处理系统的设计计算 13

3.1 中格栅 13

3.1.1设计参数 13

3.1.2设计计算 13

3.2调节池 14

3.2.1设计计算 14

3.2.2搅拌器选型 15

3.3 潜污泵 15

3.3.1设计流量 15

3.3.2设计扬程 15

3.3.3 选泵 15

3.3.4出水管径 15

3.4 竖流沉淀池 16

3.4.1中心管面积 16

3.4.2中心管直径 16

3.4.3中心管喇叭口与反射板之间的缝隙高度 16

3.4.4沉淀部分有效断面积 16

3.4.5沉淀池直径 16

3.4.6沉淀部分有效水深 16

3.4.7校核集水槽出水堰负荷 16

3.4.8沉淀部分所需体积 17

3.4.9圆截锥部分容积 17

3.4.10沉淀池总高度 17

3.4.11出水设计 17

3.4.12管径设计 18

3.4 集水井 18

3.5 潜污泵 18

3.5.1设计流量 18

3.5.2设计扬程 18

3.5.3 选泵 18

3.6 EGSB反应器 19

3.6.1尺寸设计 19

3.6.2进水设计 19

3.6.3出水设计 21

3.6.4三相分离器设计 21

3.6.5回流设计 23

3.6.6.产气设计 24

3.6.7排泥设计 24

3.7 CASS反应池 25

3.7.1设计参数 25

3.7.2 CASS池外形尺寸 26

3.7.3隔墙底部连通孔口尺寸 27

3.7.4排水设计 27

3.7.5排泥设计 28

3.7.6污泥回流 28

3.7.7鼓风设计 29

3.7.8曝气设计 31

3.7.9搅拌器选型 31

第四章 污泥处理构筑物的设计计算 32

4.1初沉污泥 32

4.1.1贮泥池 32

4.1.2螺杆泵 32

4.1.3带式压滤机 33

4.2剩余污泥 34

4.2.1集泥井 34

4.2.2螺杆泵 35

4.2.3浓缩压滤一体机 35

4.2.4烘干机 37

第五章 污水处理构筑物的总体布置 38

5.1平面布置 38

5.1.1污水处理构筑物平面布置原则 38

5.1.2污水处理构筑物平面布置 38

5.2构筑物间的高程计算 39

第六章 污水处理投资估算 41

6.1编制依据 41

6.2投资估算方法 41

6.2.1建筑安装工程费的调整 41

6.2.2设备购置费的调整 42

6.2.3工程建设其他费用的调整 42

6.2.4基本预备费的调整 42

6.2.5指标基价的调整 42

6.3总投资估算 42

6.3.1土建部分建设费用计算 42

6.3.2设备部分建设费用计算 43

6.3.3绿化、道路和围墙等部分建设费用计算 44

6.3.4本工程总投资预算 44

参考文献 45

致谢 46

请支付后下载全文,论文总字数:25280字

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图