登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 土木建筑类 > 建筑环境与能源应用工程 > 正文

肥河监狱空调设计毕业论文

 2020-04-15 08:04  

摘 要

本设计建筑位于江苏省徐州市,属于公共建筑。建筑六层总高度为21m,层高为3.4m。总建筑面积为8300,一到二层分为精神病犯区,三到六层为女犯区。需要在原有的基础建筑设计上进行建筑空气调节系统设计。本文第一章根据规范先将设计参数及建筑原始资料一一列出,第二章跟据冷负荷系数法进行冷负荷计算及根据单位面积热指标法进行热负荷的相关计算。第三章室对空调风系统、水系统、冷热源系统的比较选择。最后风系统确定使用独立新风加风机盘管、水系统选用闭式、同程式、两管制式系统、冷热源选用地源热泵。其后就是对房间风量的确定与设备的选则,确定房间的送风状态点和送风量。对风系统、水系统的水力计算从而进行画图。本文还对水管阀件,机房设备进行设计计算,也对空调系统的消声减震保温防腐也有一定的讨论。

 

关键词:空调系统 负荷计算 风机盘管 水力计算

 

 

 

 

 

 

 

Feihe prison air conditioning design

Abstract

This design building is located in Xuzhou City, Jiangsu Province and is a public building. The total height of the six floors of the building is 21m and the height of the building is 3.4m. The total construction area is 8300m^2. The first to second floors are divided into mentally ill areas, and the third to sixth floors are female prison areas. The design of the building air conditioning system needs to be carried out on the original basic building design. The first chapter of this paper lists the design parameters and the original building materials according to the specifications. The second chapter calculates the cooling load according to the cold load coefficient method and the heat load according to the unit area thermal index method. The third chapter compares the choice of air conditioning air system, water system and cold heat source system. Finally, the wind system determines the use of independent fresh air fan coils, the water system uses closed type, the same program, two control systems, and the cold heat source selects the ground source heat pump. It is followed by the determination of the air volume of the room and the selection of the equipment to determine the air supply status point and air supply volume of the room. The hydraulic calculation of the wind system and the water system is performed to draw a picture. This paper also designs and calculates the water pipe valve parts and equipment room, and also discusses the anti-corrosion insulation of the air conditioning system.

 

Key Words: Air Conditioning System; Load Calculation; Fan coil; Hydraulic Calculation

目录

Feihe prison air conditioning design III

Abstract III

第一章 工程概况与原始资料 1

1.1 工程概况 1

1.2 原始资料 1

1.2.1 维护结构参数 1

1.2.2 空调室内设计参数 1

1.2.3 室外气象参数 2

1.2.4 照明功率 2

1.2.5 电器设备使用功率 3

1.2.6 人员密度 3

1.2.7 人体的散热和散湿 3

第二章 负荷计算 4

2.1 维护结构 4

2.1.1 外墙 4

2.1.2 屋面 4

2.1.3 外窗 4

2.1.4 内墙 5

2.2 太阳辐射得热 5

2.3 人体、照明和设备 6

2.3.1 人体 6

2.3.2 照明 7

2.3.3 设备 7

2.4 示例计算 7

2.5 冷负荷、散湿量汇总 11

2.6 冬季热负荷计算 11

2.6.1 热负荷计算方法 11

2.6.2 热负荷计算 12

第三章 空调方案的确定 13

3.1 风系统 13

3.1.1 空调系统划分原则 13

3.2 水系统 15

3.2.1 空调水系统的设计原则 15

3.2.2 方案比较 16

3.3 冷热源方案的选择 17

3.3.1 常见的冷热源优缺点分析 18

3.3.2 技术分析 21

3.3.3 冷热源设备选型 22

第四章 房间风量、冷量的计算及空调设备选择 23

4.1 空调房间风量计算 23

4.1.1 房间新风量确定 23

4.1.2 房间送风量计算 26

4.2 风机盘管 新风系统房间状态点确定及设备的选型 27

4.2.1 空气处理过程 27

4.2.2 房间状态确定 28

4.2.3 风机盘管及新风机组选择计算 28

第六章 空调风系统水力计算 30

6.1 风系统设计要求与方法 30

6.2 新风系统风管水力计算 31

第七章 气流组织设计计算 33

7.1 气流组织计算的目的 33

7.2 风机盘管加新风系统气流组织的设计计算 33

第八章 水系统设计计算 35

8.1 水系统的设计原则和系统形式 35

8.2 水系统水力计算的过程及公式 35

8.3 冷凝水水管路设计计算 37

8.4 水泵选择 38

第九章 通风与防排烟设计 39

9.1 卫生间与浴室的排风处理 39

9.1.1 计算原则 39

9.1.2 设计计算 39

9.2 防排烟设计 39

第十章 冷热源机房设计及设备选型 40

10.1 冷源机房的设计应遵循以下原则: 40

10.2 分水器和集水器 40

10.3 冷却水水泵 41

10.4 冷冻水软化水箱 42

10.5 膨胀水箱 42

10.6 冷却塔补水量 42

第十一章 管段的保温与防腐 44

管段的保温 44

11.1 常见的保温材料: 44

11.2 保温结构: 44

11.3 防腐说明: 45

第十二章 系统的消声、减震 46

12.1 消声设计: 46

12.2 减震设计: 47

结语 48

参考文献 49

附录1 冷负荷计算 50

附录2 冷负荷汇总 54

附录3 散湿量计算 55

附录4 热负荷计算 58

附录5 风量及冷量计算 62

附录6 新风系统水力计算 68

附录7 机械排风计算 77

附录8 水系统水力计算 78

附录9 设备参数 86

工程概况与原始资料

工程概况

本建筑位于江苏省徐州市,建筑共六层总高21m,层高为3.4m。总建筑面积为8300,分为一到二层为精神病犯区,三到六层为女犯区。

原始资料

维护结构参数

根据GB50189-2015《公共建筑节能设计标准》徐州市的气候分区为寒冷地区,属于甲类建筑。

查《空气调节》第四版及《实用空调设计手册》得本监狱的维护结构材料的选取及其热工参数如下表:

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图