登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 土木建筑类 > 建筑环境与能源应用工程 > 正文

上海某大厦办公用房空调通风系统设计毕业论文

 2022-01-26 11:01  

论文总字数:19885字

摘 要

随着人们物质生活水平的大幅度提高,人们对于建筑的功能要求已不再是简单的“遮风挡雨”,随之而来的是舒适性方面的更高要求,因此室内热湿环境问题和节能问题越来越引起人们的重视。

本设计为上海某大厦的空调设计,是一个以办公为主的十层建筑。本工程建筑高度39m,地下一层,地上十层,建筑总面积140000m2。其中一、二、三、四、六、十层是标准层,四到五层,六到九层空间布置一致;全建筑风系统采用风机盘管加新风系统,每层采用独立的新风系统来满足室内空气的对新风的要求;水系统采用双管闭式系统,根据逐时法运算冷负荷,进行相关计算。

结合建筑的特点,采用风冷热泵系统,以达到节约运行成本的目的。

关键词:冷负荷、新风系统、冷水机组、风机盘管

Abstract

With the improvement of people's living standard, people's functional requirements for buildings are no longer a simple "wind-proof and rain-proof", and the more demanding of comfort, so the problem of indoor hot and humid environment and energy-saving problems have attracted more and more attention.

This design is the air conditioning design of a building in Shanghai, is a ten-story building based on office. The height of the project is 39m, the ground floor is one floor, the ground floor is ten stories, and the total building area is 140000m 2. One, two, three, four, six, ten floors are the standard layer, four to five floors, six to nine layers of space layout is the same; The whole building air system adopts fan coil and fresh air system, and each floor adopts independent fresh air system to meet the requirements of indoor air, and the water system adopts double tube closed system to calculate the cooling load according to the index method.

And the air-cooled heat pump system is adopted to achieve the purpose of saving the running cost in combination with the characteristics of the building.

Key words: cold load, fresh air system, chillers, fan coil

目 录

目 录 IV

第一章 工程简介 1

1.1 工程概况 1

1.2 设计资料 1

第二章 空调负荷的计算 3

2.1 空调区冷负荷的组成 3

2.2 空调区冷负荷计算的准备工作 3

2.3 空调区冷负荷计算 3

第三章 设计方案的确定 11

3.1空调系统的分类和比较 11

3.2系统选择说明 14

第四章 风量的计算及空调设备的选型 15

4.1 风机盘管系统 15

4.2 散流器的选型及校核计算 16

4.3 新风量的计算及新风机组的选型 17

4.4确定房间的气流组织 18

第五章 空调水系统 21

5.1 空调冷冻水系统 21

5.2 空调冷凝水系统 24

5.3空调水系统的附件 25

5.4空调水系统的安装要求 26

第六章 空调风系统 27

6.1空调风系统的水力计算 27

6.2风口的布置 30

6.3风管的布置及附件 30

第七章 机房设计及设备的选择 32

7.1冷热源方案的选择 32

7.2 冷热源机组的选型 33

7.3 冷热源机房的设计 34

7.4 机房其他设备选择 34

第八章 管道的保温 36

8.1 保温材料 36

8.2 保温层厚度的确定 36

第九章 空调系统的消声减震 38

9.1 空调系统的消声 38

9.2 空调装置的隔振 38

9.3 减震设计 38

第十章 空调系统的防火排烟 40

10.1 空调系统的防火措施 40

10.2 空调系统的排烟 40

第十一章 通风设计 41

11.1确定通风方式 41

11.2送风量与排风量的计算 41

11.3管道系统的布置与水力计算 41

11.4通风设备与风机的选用 42

11.4.1风机的选用 42

致谢 44

参考文献 45

第一章 工程简介

1.1 工程概况

本工程为上海某大厦的空调设计工程,位于上海,属夏热冬冷地区,甲类建筑;工程建筑高度39m,地下一层,地上十层,建筑总面积14000m2

1.2 设计资料

1.2.1 设计依据

本工程空调初步设计根据提供的设计任务书和建筑专业提供的图纸,并依照暖通现行国家颁发的有关规范、标准进行设计,具体为:

表1-1 相关设计规范及标准

1. 《高层建筑空调设计手册》中国建筑工业出版社,潘云钢主编,2013年

2. 《空气调节》第五版,中国建筑工业出版社,赵荣义主编,2014年

3 《民用建筑供暖通风与空气调节设计规范》,(GB50736-2012),中国建筑工业出版社

4 《民用建筑制冷空调设计资料集》,中国建筑工业出版社,宋孝春,2004年

  1. 《实用供热空调设计手册》,中国建筑工业出版社,陆耀庆主编,2008年
  2. 《建筑设计防火规范》,(GB50016-2014),中国建筑工业出版社

7. 《公共建筑节能设计标准》,(GB50189-2015),中国建筑工业出版社

8. 《通风与空调工程施工质量验收规范》,(GB5024—2014)

请支付后下载全文,论文总字数:19885字

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图