登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 土木建筑类 > 建筑环境与能源应用工程 > 正文

杭州通信枢纽工程辅楼通风空调工程设计毕业论文

 2022-01-07 09:01  

论文总字数:51659字

摘 要

Abstract VI

第一章 项目概况 1

1.1 原始资料 1

1.1.1 工程概况 1

1.1.2 围护结构参数表 1

1.1.3 人员密度 2

1.1.4 推荐照明功率 2

1.1.5 设备功率密度 2

1.2 设计参数 3

第二章 空调负荷计算 5

2.1 冷负荷计算 5

2.1.1 冷负荷计算方法 5

2.1.2 以一层大餐厅为例计算其冷负荷 8

2.1.3 其他房间冷负荷 16

第三章 热湿负荷计算 23

3.1 各房间热负荷计算 23

3.2 各房间湿负荷 24

3.2.1 人体散湿 24

3.2.2 食物散湿 25

3.3 热湿比 26

第四章 空调系统划分与方式选择 28

4.1 空调方式的选择 28

4.2 空气处理方案的分析 29

4.2.1 全空气一次回风系统方案分析 29

4.2.2 新风加风机盘管系统 29

4.2.3 确定总风量与风机盘管风量 30

4.3 空气处理过程 30

4.3.1 一次回风系统风量计算 30

4.3.2 风机盘管加新风系统风量计算 33

4.3.3 全空气系统及风机盘管加新风系统风量汇总 34

第五章 空调设备选型 37

5.1 空气处理机组 37

5.2 风机盘管加新风系统 37

5.2.1 风机盘管选型 37

5.2.2 新风机组选型 38

第六章 风系统送风计算 40

6.1 气流组织计算与散流器选型 40

6.2 风管水力计算 42

6.2.1 风管的材料与形式 42

6.2.2 风管水力计算的步骤 42

6.2.3 管道内风速 43

6.2.4 水力计算过程 43

第七章 通风系统设计 46

7.1 通风量计算 46

7.1.1 换气次数 46

7.1.2 通风量计算 46

7.1.3 风口选型 47

7.2 通风系统水力计算 48

7.3 风机及排风扇选型 52

7.4 防排烟系统 54

第八章 冷热源系统 55

8.1 冷源方案 55

8.1.1 冷源的分析与选择 55

8.1.2 冷源机组选型 57

8.2 冷水系统方案 59

8.2.1 水系统方案的选择 59

8.2.2 冷却水系统 59

8.2.3 冷冻水系统 63

8.2.4 制冷机房与设备选型 65

8.3 热源方案 71

8.3.1 锅炉的分析 71

8.3.2 锅炉选择 72

8.3.3 板式换热器选型 74

8.4 热水系统水力计算 76

8.4.1 热水管道水力计算 76

8.4.2 燃气管道水力计算 79

8.4.3 锅炉烟道水力计算 81

8.5 锅炉机房及辅助设备 83

8.5.1 机房布置 83

8.5.2 钠离子交换器 84

8.5.3 除氧设备 85

8.5.4 补水箱 85

8.5.5 补水泵 86

8.5.6 燃气调压器 87

8.5.7 放散管及燃气过滤器 88

8.5.8 燃气过滤器及排污系统 88

8.6 保温、减振和防噪 88

8.6.1 管道保温设计 88

8.6.2 设备减振设计 89

8.6.3 设备消声与隔音设计 89

参考文献 91

结语 92

杭州通信枢纽工程辅楼通风空调工程设计

摘要

本建筑位于杭州市,是一个集餐厅、办公、健身等为一体的通信枢纽工程辅楼。地上共四层,地下一层,总高度为23.5m。地上总占地面积为10200m2,地下总占地面积2001m2

通过经济性和技术性比较选择电动压缩螺杆式冷水机组作为冷源,经分析杭州市资源情况,选用燃气热水锅炉作为热源。针对不同房间的功能不同,对于餐厅、办公室和健身房等大空间房间选用全空气系统,对于小房间比如小型办公室、小餐厅和走廊等这类使用灵活的房间,采用风机盘管加新风系统,实现控制灵活的目的。对于全空气系统采用一次回风方式,对于风机盘管系统采用独立送新风的方式。

气流组织选用垂直送风方式。空调水系统设计为闭式、两管制、垂直同程式,各楼层水管为异程式。本次说明书对系统的消声减振及保温也做了一定讨论。

关键词:空调通风 冷热源 全空气系统 风机盘管 风系统 水系统

Ventilation and Air Conditioning Engineering Design of Auxiliary Building of Hangzhou Communication Hub Project

Abstract

This building is located in Hangzhou, and is a communication hub project auxiliary building integrating restaurant, office and fitness.There are four floors above ground and one underground, with a total height of 23.5m. The total area on the ground is 10200m2, and the total area under the ground is 2001m2.

Through economic and technical comparison, the electric compression screw chillers are selected as the cold source, and the gas-fired hot water boiler is selected as the heat source by analyzing the resources of Hangzhou. According to the different functions of different rooms,the all-air system is used for large space rooms such as restaurants, offices and gyms, for small space such as small offices, small restaurants and corridors or the use of flexible rooms, the use of fan coil and fresh air systems can achieve the purpose of flexible control. For the all-air system,a one-time return air method is used, and for the fan coil system, the independent fresh air supply mode is adopted.

The air distribution uses vertical air supply.The air-conditioning water system is designed to be closed, two-control,and vertical with the same program, and the water pipes on each floor are different programs. This paper also discusses the noise reduction, vibration reduction and heat preservation of the air conditioning system.

请支付后下载全文,论文总字数:51659字

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图