登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 土木建筑类 > 建筑环境与能源应用工程 > 正文

成都市某部队宿舍楼通风空调系统设计毕业论文

 2022-01-06 10:01  

论文总字数:28351字

摘 要

本项目位于成都市,其中地上建筑面积为8400㎡, 设有食堂、宿舍、会议室、活动室等;地下建筑面积为4000㎡,设有车库和厨房,总高度为32.4m。

选择一种比较常规的方式,将电动压缩螺杆式冷水机组作为冷源,将附近锅炉房能提供0.6MPa的饱和蒸汽作为热源。针对各房间的功能不同,不同的区域采取不同的空调系统:全空气系统或风机盘管和独立新风系统。对于全空气系统采用一次回风8℃温差送风的方式,风机盘管系统采用独立新风的方式,通过计算确定了各房间的送风状态和送风量。

对于全空气系统采用了下送风的方式,宿舍、会议室等采用侧送风的方式。空调水系统设计为闭式、两管制、水平同程式,整个楼层水管立管设计为异程式。本文对空调系统的消声减震及保温也做了一定的讨论。

关键词:空气调节 全空气系统 风机盘管 新风 冷热源

Ventilation and air conditional design of a military dormitory building in Chengdu

Abstract

This project is located in Chengdu, where the above-ground building area is 8400 square meters, with canteen, dormitory, meeting room, activity room, etc .; the underground building area is 4000 square meters, with garage and kitchen, and the total height is 32.4m.

Through a certain degree of comparison, a more conventional way is selected, using the electric compression screw chiller as the cooling source, and the nearby boiler room can provide 0.6MPa of saturated steam as the heat source. According to the different functions of each room, different air conditioning systems are adopted in different areas: full air system or fan coil and independent fresh air system.

For the all-air system, a return air temperature of 8 degrees is used to supply air. The fan coil system uses an independent fresh air method to determine the air supply status and air supply volume of each room through calculation.

The air distribution system adopts the air supply method of the diffuser for the all-air system, and the side air supply method is used in the dormitory and conference room. The air-conditioning water system is designed to be closed, two-control, and the same level, and the entire floor water pipe riser is designed to be a different program. This paper also discusses the noise reduction, vibration reduction and heat preservation of the air conditioning system.

Key words: air conditioning;all air system;FCU fresh air;cold and heating source

energy

目 录

摘要 II

Abstract III

第一章 工程概况 1

1.1 建筑概况 1

1.2 建筑资料 1

1.2.1围护结构参数 1

1.2.2 人员密度 1

1.2.3 推荐空调使用时间 1

1.2.4 房间的分类 1

1.3 气象参数 2

第二章 负荷计算 3

2.1 冷负荷计算方法 3

2.1.1 通过围护结构传入的热量 3

2.1.2 外窗的太阳辐射冷负荷 4

2.1.3 人体显热冷负荷 4

2.1.4 灯具冷负荷 4

2.1.5 设备显热冷负荷 5

2.1.6 人体散湿形成的冷负荷 5

2.1.7室内计算冷负荷 5

2.2以一层食堂为例计算其冷负荷 5

2.2.1.地面及楼板传热冷负荷 5

2.2.2.内墙冷负荷 6

2.2.3.外墙冷负荷 6

2.2.4.外窗冷负荷 7

2.2.5.照明冷负荷 8

2.2.6. 设备负荷 8

2.2.7.人体负荷 8

2.2.8室内总负荷 9

2.2.9 其他房间计算冷负荷 9

2.3 热、湿负荷 9

2.3.1 各房间热负荷计算 9

2.3.2各房间湿负荷计算 9

第三章 系统方案选择 11

3.1 空调风系统方案的选择 11

3.1.1 全空气系统的选择依据 11

3.1.2风机盘管加独立新风系统的选择依据 11

3.2 空调水系统方案的选择 11

3.2.1 冷冻水 11

3.2.2 冷却水 11

3.3 冷热源方案的选择 11

3.3.1 冷源 11

3.3.2 热源 13

第四章 风量、冷量、水量计算 14

4.1 全空气系统 14

4.2 风机盘管加新风系统 15

第五章 空调设备选型 18

5.1 全空气处理机组选型 18

5.2 风机盘管选型 18

5.3 新风机组选型 19

第六章 风系统水力计算 20

6.1全空气系统风管水力计算 20

6.1.1送风管道的材料与形式 20

6.1.2风管水力计算的步骤 20

6.1.3管道内风速 20

6.1.4水力计算过程 20

6.2风机盘管加独立新风的新风设计 21

第七章 水系统水力计算 22

7.1 管材的选择 22

7.2 水管管径的确定 22

7.2.1供回水计算 22

7.2.2水管选取 22

第八章 建筑通风与防排烟 24

8.1 设计原则 24

8.2 自然排烟 24

8.3 机械排烟与通风量计算 24

8.3.1 一般规定及设计条件 24

8.3.2 通风系统排风量计算 24

8.3.3电梯前室加压送风量计算 25

8.3.4地下厨房风量计算 25

8.3.5厨房送风量计算 25

8.4 排风管水力计算 25

8.4.4 排风管路设计方案 26

8.4.4 排风管路设计方案 26

8.4.5风机的选型 26

第九章 冷源设计 28

9.1 制冷机组选型计算 28

9.2 制冷机房确定 28

9.3 冷却塔选型计算 28

9.4 水泵选型计算 28

9.4.1 冷冻水泵 28

9.4.2冷冻水泵 32

9.4.3 冷却水泵 32

9.4.4 补水泵 33

9.5 分、集水器设计计算 33

9.6 软化水箱选型计算 34

9.7电子水处理器选型计算 34

9.8软水器选型计算 35

9.9定压罐选型计算 35

第十章 热源设计 36

10.1 换热器选型计算 36

10.2 热水水泵选型 37

第十一章 管道保温与设备消声减震 39

11.1 管道的保温 39

11.2 设备的消声减震 39

参考文献 40

附录 41

请支付后下载全文,论文总字数:28351字

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图