登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 土木建筑类 > 建筑环境与能源应用工程 > 正文

南京市办公楼空调设计毕业论文

 2022-01-06 10:01  

论文总字数:86601字

摘 要

一、概况、参数 3

1.1、工程概况 3

1.2、气象参数 3

1.3、建筑的围护结构 、土建资料、热工性能 4

1.4、人员资料 5

1.5、照明和设备资料 6

1.6、其他资料 6

1.7、设计范围 6

二、负荷计算 7

2.1、空调工程设计的基础 —— 冷负荷计算 7

2.2、空调系统的负荷构成结构 15

2.3、空调系统冷负荷计算 8

2.4、空调热负荷的计算 17

三、系统选择 18

3.1、冷热源选择 18

3.2、空调系统的选择 20

3.3、空调系统方案的确定 22

四、新风负荷计算 23

4.1、新风量的确定 23

4.2、新风量冷负荷的确定 29

4.3、新风量湿负荷的确定 29

五、空气处理设备的选择 25

5.1、空调方案的选择 27

5.2、送风量计算 28

5.3、各区域空调室内机的选取 28

5.4、新风机组的选择 29

5.5、风机盘管加新风系统夏季空气处理过程 29

5.6、风机盘管加新风系统冬季空气处理过程 29

六、气流组织 32

6.1、气流组织分布 32

6.2、风口布置 33

6.3、风口选择计算 33

七、水力计算 34

7.1、 风系统水力计算 34

7.2、水管水力设计 38

7.3、冷冻水系统设计 38

7.4、冷凝水管道设计 43

7.5、水系统安装要求 44

八、制冷机房设备的选择计算 45

8.1、水源热泵机组选型计算 45

8.2、地埋管的设计计算 45

8.3、循环水泵的选择 46

8.4、集分水器的设计计算 47

8.5、水处理设备的选择计算 48

8.6、阀门安装 48

九、防排烟设计 50

9.1、概述 50

9.2、地下室防排烟通风设计 50

9.3、地上空间防排烟设计 52

9.4、内走廊排烟设计 53

9.5、楼梯通风设计 53

9.6、风口选型统计(防排烟) 54

9.7、系统的隔振设计 55

十、管道保温与防腐 58

10.1、管道保温 58

10.2、管道防腐 59

十一、消声减震设计 60

11.1、消声设计 60

11.2、减震设计 60

谢 辞 62

参考文献 63

附件1:水管水力计算 64

附件2:风管水力计算 81

摘 要

社会的发展进步提高了人们的生活水平,越来越多的人们开始使用相关的空调技术,以营造健康并且舒适的生活环境。

本设计为江苏省南京市某综合办公楼中央空调空调设计,两栋楼,办公楼共八层,配套楼八层,办公楼做中央空调设计,配套楼和地下室做防排烟设计。空调面积约6600,全楼采用地源热泵系统进行集中供给空调方式。

按照各个不同功能房间,办公室将该集中系统设为风机盘管加独立新风系统,新风机组从室外引入新风处理到室内空气焓值,风机盘管承担室内全部冷负荷及部分的新风湿负荷。大空间办公区采用吊顶式空气处理机组进行送风,送风方式均为下送下回。水系统采用闭式双管式,立管同程,平行管异程。冷水泵三台,两用一备;冷却水泵选三台,两用一备。卫生间通风统一由排风扇接出,在末端安装止回阀。

【关键词】 风机盘管加独立新。风系统 冷(热)负荷 管。路。设。计 制。冷。机。组

Abstract

Along。 with d。evelop。ment of so。ciety and the i。mprov。ement of pe。ople's liv。ing stan。dard, more and more p。eople are using air conditio。ning techno。logy to create a h。ealthy and com。fortable livi。ng enviro。nment.

This design for a comprehensive office building in nanjing, jiangsu province central air conditioning design, two buildings, office building a total of eight floors, supporting building eight floors, office building central air conditioning design, supporting building and basement smoke control design. The air conditioning area is about 6600 m2, and the cooling load of the whole building is 700KW. According to the room function, the whole building adopts the ground source heat pump system for centralized supply of air conditioning.

According to different functional rooms, the office sets the centralized system as fan-coil plus independent fresh air system. The fresh air unit introduces fresh air treatment from the outside to t。he indo。or air e。nthalpy, and the f。an。-。coil undert。a。kes all the in。door cooli。ng lo。ad and part of the new rheumatism load. In the office area of large space, the ceiling air handling unit is used for air supply. The water system adopts straight side double pipe type, vertical pipe with the same course and parallel pipe with different course. Three cold water pumps, dual-use one standby; Three cooling water pumps, dual - purpose one standby. Toi。let ven。tilation is u。niformly conn。ected by exh。aust fan and ch。eck val。ve is inst。alled at th。e en。d。.

On the bas。is of cooli。ng load calc。ulation, the sele。ction of ma。in eng。ine and fa。n coil is compl。。eted, and the specific。ations of air duct and wa。ter pipe are deter。mined throu。gh the ca。lculation of air volume and water volume, and the resistance and pressure head of the most adverse loop are checked to determine the new fan and water pump.

请支付后下载全文,论文总字数:86601字

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图