登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 环境科学与工程类 > 资源科学与工程 > 正文

4万m3d生活污水处理工艺设计毕业论文

 2022-03-17 07:03  

论文总字数:27889字

摘 要

随着我国社会经济的不断发展,城市化水平的逐步提高,环境保护措施的落实,以及市场经济的建立,排水事业作为城市的重要基础设施这一,也得到了蓬勃的发展。全国大多的城市兴建了一大批污水处理厂对城市的生活污水,工业废水进行处理。

本设计是对污水处理厂工程设计。本次设计均采用了国家最新的有关规定、标准、和设计规范。采用生物处理工艺,处理出水达到《城镇污水厂污染物排放标准》(GB18918-2002)一级B排放标准设计。

污水处理厂设计规模为40000m3/d。污水处理厂处理流程为:污水→粗格栅→提升泵房→细格栅→平流式沉砂池→卡鲁塞尔2000氧化沟→二沉池→消毒池→出水。

污泥流程:剩余活性污泥→集泥池→浓缩脱水一污泥消化一脱泥机房 →污泥外运。

关键词:污水处理厂 卡鲁塞2000氧化沟 污泥浓缩

ABSTRACT

With the develop of our country society economy continuously, Vitalization is gradually increasing, Environmental protection measure of practical, and with establishing of the Market economy, Draining, As one of the important foundation facilities, also got a fast development. The city in the whole nation almost built the dirty water of large quantity disposal the factory to discard the water to proceed to handle to city.

This design is the engineering design of sewage treatment plant. And this design all adopted national latest relevant provision, Standard, with design the norm.Using biological treatment process, the treatment of water to reach the "municipal wastewater discharge standards" (GB18918-2002) level B emission standard design.

Sewage treatment plant design scale of 40000m3/d. The sewage treatment plant handle the distance travelled by a stream of water being : sewage→ coarse screens→ sewage elevated pumb house→ fine screens→ Advection grit chamber→ Carrousel©2000 oxidation ditch→ secondary sedimentation tank→ Disinfection pool→ River.

Sludge distance travelled by a stream of water : Remainder sludge→ Mud pool→Sludge thickening tank→ Sludge digestion tank→ Mud removal machine room→ Transport outside the sludge.

Keywords:Sewage treatment plant; Carrousel©2000 oxidation ditch; Sludge thickening; Sludge digestion

目录

摘 要 I

ABSTRACT II

目录 III

第一章 绪论 1

1.1污泥特性 2

1.2 污泥处理方法 2

1.2.1堆肥 3

1.2.2碱性稳定化 3

1.2.3热干化 3

1.2.4焚烧 4

1.3污泥利用方案的选择 4

1.4污泥利用的潜在风险 4

1.5利用方法的比较 5

1.6其他因素 5

1.7综合评估 5

1.8中国城市污泥处理的研究动态 6

1.8.1污泥减量化技术 6

1.8.2污泥减容化技术 6

1.8.3在厌氧消化方面 6

1.8.4 在好氧消化方面 7

1.8.5 在湿式氧化[28]方面 7

1.8.6 在低温热解[29-30]方面 7

1.8.7在污泥堆肥化[31]工艺方面 7

1.9结论 7

第二章 设计资料及计划说明书 8

2.1主要内容及要求设计规模 8

2.1.1城市自然状况 8

2..1.2污水水质 8

2.2工艺流程的选择 9

2.2.1污水处理工艺选择 9

2.2.2污泥处理工艺选择 11

2.2.3工艺流程图 11

第三章 污水处理系统设计计算书 12

3.1格栅 12

3.1.1 设计说明 12

3.2污水提升泵房 14

3.2.1集水池设计 14

3.2.2 水泵选型 14

3.3细格栅计算 15

3.3.1设计流量: 15

3.3.2 设计参数: 15

3.3.3 设计计算: 15

3.4 沉砂池 17

3.4.1设计参数 17

3.4.2 设计计算 18

3.5沉淀池 19

3.5.1 设计参数: 19

3.5.2 设计计算: 20

3.6氧化沟 22

3.6.1设计参数 22

3.6.2设计计算 23

3.7二沉池 27

3.7.1设计参数 27

3.7.2设计计算 28

3.8接触消毒池与加氯间 30

3.8. 1设计参数 30

3.8.2设计计算 30

第四章 污泥处理系统设计计算书 32

4.1污泥处理要求 32

4.2污泥浓缩池 32

4.3污泥投配池 34

4.4污泥消化池 34

第五章 高程布置计算 38

5.1水头损失计算 38

5.2 高程确定 39

结 论 42

参考文献 43

致 谢 46

请支付后下载全文,论文总字数:27889字

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图