登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 环境科学与工程类 > 资源环境科学 > 正文

B镇污水处理厂工艺设计毕业论文

 2021-12-25 03:12  

论文总字数:27381字

摘 要

Abstract II

第一章 绪论 1

1.1 研究背景 1

1.2 我国污水处理现状及趋势 1

第二章 项目概述 2

2.1 自然条件 2

2.2 处理规模及出水水质要求 2

2.3 原水水质 2

2.3.1 污水水质 2

2.3.2 出水水质 2

2.3.3 设计依据 3

第三章 污水处理工艺方案的选择 4

3.1 处理工艺选择原则 4

3.2 预处理工艺比选 4

3.2.1 格栅的选择 4

3.2.2 沉砂池的选择 4

3.3 二级处理工艺比选 6

3.3.1 原水质可生化性分析 6

3.3.2 二级处理工艺比较和选择 7

3.3.3 方案比较与选择 11

3.4 三级处理工艺 11

3.4.1 消毒措施 11

3.4.2 污泥处理工艺选择 12

3.5 污水处理工艺流程 12

3.5.1 流程确定 12

第四章 建(构)筑物设计计算 14

4.1 格栅 14

4.1.1 中格栅设计计算 14

4.1.2 提水泵房设计计算 16

4.1.3 细格栅设计计算 18

4.2 沉砂池 19

4.2.1 设计计算 19

4.3 巴氏计量槽 22

4.4 生物反应池计算 23

4.4.1 设计参数 24

4.4.2 设计计算 24

4.5 污泥泵房 31

4.6 污泥浓缩池 31

4.6.1 设计参数 31

4.6.2 计算过程 32

4.6.3 浓缩装置 34

4.7 污泥脱水机房 34

4.8 接触消毒池 35

4.8.1 加氯间 35

4.8.2 液氯贮藏室 35

4.8.3 设计参数 36

4.8.4 计算过程 36

4.9 构筑物高程计算 37

4.9.1 总水头损失计算 37

4.9.2 构筑物及管渠水面标高计算 42

4.9.3 构筑物池顶标高 43

参考文献 45

致谢 46

B镇污水处理厂工艺设计

摘要

苏北某市B镇需要建造一个城镇污水处理厂,此任务书是为其比选出适合该项目的污水处理相关工艺,以及设计计算相关构筑物的各项参数,建成后,此污水处理厂将为该镇处理生活污水。

目前来看,我国愈趋严格的污水排放标准,导致许多简单的仅能处理少量污染物的污水处理工艺面临着需要改进的处境,而一些效率底下的污水处理厂也需要重建改建,针对B镇污水处理厂的拟处理规模(6万m³/d)和原水水质和目标出水水质的对比,脱氮除磷是不可或缺的一部分,而本设计采用的循环式活性污泥法工艺(CAST工艺),主体工艺为污水经过中、细格栅拦截悬浮物后,然后通过沉砂池去除砂粒,再经过生物反应池进一步去除水中各项污染物,最后消毒出水,产生的污泥则经过浓缩脱水后外运排出。

本次设计的主要构筑物:中格栅、细格栅、提水泵房,旋流沉砂池、CAST生化反应池、污泥回流泵房、污泥浓缩池、接触消毒池等。

关键词:污水处理;工艺设计;活性污泥法;脱氮除磷;CAST工艺

Process design of B town sewage treatment plant

Abstract

A town B of a city in northern jiangsu needs to build an urban sewage treatment plant. This task book is to select the relevant sewage treatment technology suitable for the project and design and calculate the parameters of relevant structures. After completion, this sewage treatment plant will be reduced to the town to treat domestic sewage.

Now, our country increasingly strict discharge standard, lead to many simple can handle only a small amount of pollutants of wastewater treatment technology is facing the need to improve the situation, and some of the efficiency of sewage treatment plant under also need to rebuild rebuilding, for B town sewage treatment plant is proposed to deal with scale (60000m³/d ) and the contrast of original water and water-quality target, denitrification and phosphorus removal is an indispensable part of, and this design adopts the circulating activated sludge technology (CASTtechnology).The main process is that the sewage intercepts suspended solids through medium and fine grates, and then the sand is removed through a sand settling tank, and then the pollutants in the water are further removed through a biological reaction tank. Finally, the effluent is disinfected, and the sludge is transported and discharged after being concentrated and dehydrated.

The main structures of this design are: medium and fine grille, water pump house, swirling sand settling tank, CAST biochemical reaction tank, sludge backflow pump room, sludge concentration tank, contact disinfection tank, etc.

Key Words:Sewage treatment; Process design; Activated sludge process; Denitrification and dephosphorization; CAST process

请支付后下载全文,论文总字数:27381字

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图