登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 环境科学与工程类 > 资源环境科学 > 正文

M镇污水处理厂工艺设计毕业论文

 2021-12-25 03:12  

论文总字数:34433字

摘 要

本设计是完成苏北某市M镇的一座13万m³/d的城镇污水处理厂处理工艺的选择确定、污水处理构筑物的设计和污水厂总平面图及处理工艺高程关系的计算,要求出水水质达到《城镇污水厂污染物排放标准》(GB18918-2002)一级A标准。经过分析当前较为成熟的污水处理方案,决定采用适合大型污水厂的A2/O工艺,并结合其他污水处理构筑物对污水进行处理,工艺流程包含中格栅、细格栅、旋流沉砂池、初沉池、A2/O池、辐流式二沉池、接触消毒池等。污泥处理工艺采用重力浓缩池进行浓缩,加药调节后进行压滤,得到的泥饼外运处理。设计书中首先对整个污水处理工艺的选型做了详细的比较和选择,并对每个处理单元的选型做了说明,接着对每个单元的构筑物进行了细致的设计计算。在综合比较,依据标准计算后得到了本次设计成果。

关键词:污水处理厂 A2/O工艺 工艺设计

Process design of sewage treatment plant in town M

ABSTRACT

This design is to complete the selection and determination of the treatment process of a 130,000 m³/d urban sewage treatment plant in a town of M in northern Jiangsu, the design of the sewage treatment structure, the calculation of the general plan of the sewage plant and the elevation of the treatment process. Level A standard of "Emission Standard of Pollutants for Urban Sewage Plants" (GB18918-2002). After analyzing the current more mature sewage treatment plan, it was decided to use A2/O process suitable for large-scale sewage treatment plants, and combine with other sewage treatment structures to treat sewage. The process flow includes medium grille, fine grille, cyclone grit sink, Primary settling tank, A2/O tank, radial flow secondary settling tank, contact disinfection tank, etc. The sludge treatment process adopts gravity concentration tank for concentration, and after adding the medicine to adjust, press filter, the resulting mud cake is transported out. The design book first made a detailed comparison and selection of the entire sewage treatment process selection, and explained the selection of each treatment unit, and then carried out detailed design calculations for the structure of each unit. After comprehensive comparison, the design results were obtained after calculation according to the standard.

Key Words: Sewage treatment plant; A2/O process; process desi

目 录

摘 要 I

ABSTRACT II

第一章 城市概况 1

1.1 城市自然状况 1

第二章 设计内容 2

2.1 设计规模 2

2.2 进出水水质要求 2

第三章 污水及污泥处理工艺流程比选及确定 3

3.1 工艺流程比选 3

3.1.1 传统活性污泥法改良型A2/O法 3

3.1.2 SBR工艺 4

3.1.3 氧化沟工艺 4

3.2 污水处理工艺选择 5

3.3 污泥处理工艺 7

第四章 城镇污水处理厂设计计算书 8

4.1 中格栅计算 8

4.1.1 设计原则 8

4.1.2 设计参数 8

4.1.3 设计计算 9

4.2 提升泵房 11

4.3 细格栅 11

4.3.1 设计参数 11

4.3.2 设计计算 12

4.4 沉砂池设计计算 15

4.4.1 设计原则 15

4.4.2 设计参数 15

4.4.3 设计计算 16

4.5 初沉池 17

4.5.1 设计原则 18

4.5.2 设计计算 19

4.6 生化处理池 22

4.6.1 设计参数 22

4.6.2 设计计算 23

4.7 二沉池设计 35

4.7.1 设计参数 35

4.7.2 设计计算 35

4.8 消毒池 39

4.8.1 设计依据 39

4.8.2 设计计算 39

4.8.3 加氯机的选择 40

4.8.4 氯库及加氯间的设计 40

4.9 污泥浓缩与脱水 41

4.9.1 污泥浓缩 41

4.9.2 重力浓缩池设计 41

4.9.3 贮泥池设计 43

4.9.4 污泥脱水 44

第五章 污水厂平面布置和高程布置 45

5.1 厂区平面布置原则 45

5.2 管渠水力计算 45

5.2 构筑物水头损失 48

5.3 污水管线高程布置 48

5.3 污泥管线高程布置 49

参考文献 50

致 谢 51

第一章 城市概况

1.1 城市自然状况

地理位置:位于苏北地区,苏北某市M镇。

请支付后下载全文,论文总字数:34433字

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图