登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 材料类 > 高分子材料与工程 > 正文

超细成核剂改性聚丙烯的力学性能与结晶行为研究毕业论文

 2022-04-11 08:04  

论文总字数:18624字

摘 要

首先用气流粉碎机将β成核剂NT-A进行超细化处理得到细化NT-A,然后后造粒,注塑成样条。通过用激光散射技术测定了两种β成核剂的粒径及其分布,并利用偏光显微镜(PLM)观察、示差扫描量热仪(DSC)分析和力学性能测试等方法研究了β成核剂粒径及其分布对等规聚丙烯(iPP)结晶行为、微观结晶及耐热性能的影响。具体地探究了不同细化程度的成核剂以及不同量的成核剂对等规聚丙烯的结晶行为、微观结晶和宏观性能的关系。

PP是比较特别的α晶型,球晶较粗大,是放射状生长状态,加入成核剂后,β球晶的数量很显然的增加,而且β球晶的尺寸显然减小。实验加入中小于400目的成核剂,iPP的结晶效果更好!也就是说细化程度越高的,对iPP的结晶性能越好!实验数据中,当加入小于400目的成核剂NT-A,对应的试样样条的综合力学性能相对于加入别的细化程度不同的成核剂变得相对好了。则加入细化程度高的成核剂对应的iPP的力学性能也更加好!

关键词:聚丙烯 细化成核剂 结晶性能 力学性能

Mechanical properties of ultrafine nucleating agent with the crystalline polypropylene modified Behavior

Abstract

First,with a jet mill to β-nucleating agent NT-A ultrafine processing to be a refinement NT-A,and then pelletized, injection molded splines.By measuring two β nucleating agent particle size and its distribution by laser light scattering technique,and using polarized light microscopy (PLM) observation,differential scanning calorimetry (DSC) analysis and mechanical testing methods to study the β-nucleating agent particle size and distribution of isotactic polypropylene (iPP) crystallization behavior,the impact of microscopic crystalline and heat resistance.Explore in detail the relationship between the crystallization behavior of different doses of different level of detail of a nucleating agent and a nucleating agent for isotactic polypropylene,crystalline microstructure and macroscopic properties.

PP showed typical α crystalline form coarse crystal ball,radial growth,after the addition of a nucleating agent,the number of β spherulites increased significantly,and β spherulite size significantly reduced. Experimental less than 400 mesh was added nucleating agent,the crystallization of iPP better effect!This means that the higher the level of detail,the crystallization behavior of iPP better! Experimental data,when added to less than 400 mesh nucleating agent NT-A,the mechanical properties of the sample corresponding spline with respect to the other with different level of refinement to the nucleating agent becomes relatively good.Join the high level of detail of the mechanical properties of the nucleating agent corresponding iPP also more good!

Key Words: Polypropylene; Refinement nucleating agent; Crystalline properties;Mechanical propert

目 录

摘 要 I

Abstract II

目 录 III

第一章 前言 1

1.1聚丙烯 1

1.2成核剂 2

1.2.1 成核剂 2

1.2.2成核剂细化 3

1.3改性聚丙烯的结晶行为的影响 3

1.4改性聚丙烯的力学性能的影响 4

1.5本文研究内容 4

第二章 实验部分 5

2.1实验主要原料 5

2.2实验设备和仪器 5

2.3工艺流程 6

2.4成核剂细化工艺参数 6

2.5样品制备 6

2.6试样的测试 7

第三章 结果与讨论 9

3.1成核剂NT-A粒径及其分布的分析 9

3.2 DSC分析 11

3.3 PLM观察 13

3.4力学性能 14

第四章 结论 17

参考文献 18

致 谢 20

第一章 前言

1.1聚丙烯

聚丙烯近几年在我国发展速度较快。聚丙烯(PP)具有良好的机械性能、无毒、相对密度低、耐热、耐化学药品、容易加工成型等优良特性,且价格低廉,并有突出的耐环境应力开裂性和耐性[1-2]。但PP属于半结晶型聚合物,结晶度较低,影响其使用效果。通过在PP中添加结晶成核剂,诱导PP结晶,或者使其结晶行为发生改变,可改善其拉伸强度、透明性或抗冲击性能等,从而进一步拓宽PP的应用领域[1].

2005年和2006年我国聚丙烯进口量比较大。。2007年上半年我国已进口聚丙烯159.2万吨,比上年同期增长2.7%。等规聚丙烯(ZPP)由于其较低的制造成本、良好的力学性能和广泛的应用领域,成为最重要的热塑性聚合物之一。ZPP包含5种晶型,在一般的加工条件下,iPP是大部分为α晶的形式存在着,并随之有微少量的β晶。α-iPP有比较高的拉伸强度和弯曲模量,然而其冲击韧性尤其是低温冲击韧性差的原因而限制了iPP的用途。和α结晶型的iPP相比,β型的iPP的冲击韧性显著提高,这在工业应用上极其重要。目前,加入β成核剂是生产β-iPP比较有效的办法[2]

请支付后下载全文,论文总字数:18624字

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图