登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 土木建筑类 > 土木工程 > 正文

M2南京商厦停车库混凝土框架结构设计(二)

 2022-12-06 09:12  

论文总字数:177572字

摘 要

层高(m)

基本风压值

基本雪压值

抗震设防烈度

最高水位距地表(m)

设计地震分组

基本地震加速度值

场地土类别

一层:6.500m

二~八层:3.0m

0.40

0.65

7度

3.1

第1组

0.1g

Ⅲ类,地面粗糙程度为B类

本工程为八层框架结构施工,建筑总面积1200m平方米,此工程施工图见附楼高度、基本风压值、地震烈度、抗震设防设计根据施工图和荷载值确定基本加速度、土的类型、设计范围、地震界面布置、地面装饰等。这个项目的结构设计包含了结构计算、施工图计算等计算步骤,还包括其他结构电气计算和手工计算等项目,进而对计算结果比较分析等等步骤。还含有选择材料,进行结构设计,确定截面结构的尺寸并验算;项目中需要运用近似计算的计算方法;并且需要对框架做出分析;还需要分析五种内力,计算了梁柱配筋等最不利组合;独立现浇基础设计通过PKPM模型进行计算,包括了梁间线性荷载,接着对SATWE做出了测量分析,最后给出计算结果;根据SATWE计算结果,画了混凝土结构的施工图,其中包含了结构设计、基础平面设计、大样基础、柱配筋图、盖板配筋图,结构设计要求根据安全、经济、实用的标准,必须根据专业标准、国家最新的规范来计算设计。

建筑结构设计的关键词:混凝土结构设计;建筑框架结构;混凝土强度计算;建筑梁柱的配筋计算。

Design of concrete frame structure of parking garage of M2 Nanjing commercial building (2)

abstract

The project is an eight story frame structure house with a total construction area of 12000 square meters. The architectural drawing of the project is shown in the annex. Thefloor height, basic wind pressure value, seismic fortification intensity, design basic seismic acceleration value, site soil type and design earthquake grouping are shown in Table 1. Facade decoration and floor can be determined according to the architectural drawing. The load value shall be taken according to the load code for building structures or the actual situation of buildings. The design includes: structure calculation and construction drawing. The results are compared with each other.

The design includes: design calculation and design calculation; Firstly, the structure is calculated, and then the calculation results are compared.Manual calculation content: material selection, structural layout and determination of section size adopt beam group method to calculate a frame (4-axis), consider 5 kinds of internal force combinations, and select the most unfavorable combination for independent foundation design of beam column reinforcement design.Calculation content: the PKPM model is used to calculate the line load between beams, and then the final design results of concrete structure (beam, column and slab reinforcement) are analyzed and calculated by SATWE according to the calculation results of SATWE.This design is composed of eight parts: general description of structural design, general layout, foundation test, column reinforcement drawing, floor reinforcement drawing, floor reinforcement drawing and stair design drawing.In short, the structural design follows the principles of safety, economy and practicality, and is carried out in strict accordance with relevant professional standards, the latest national requirements and relevant data.

Key words: Structural design; Frame structure; Concrete; Reinforcement Calculation

目录

摘要………………………………………………………………………………………………… ………….Ⅰ

Abstract…………………………………………………………………………………………………....……Ⅱ 第一章 引 言......................................................................................................................................................... 1

1.1选题背景及意义......................................................................................................................................1

1.2课题设计方案..........................................................................................................................................1 第二章 工程概况和设计资料...............................................................................................................................2

2.1工程名称..................................................................................................................................................2

2.2工程概况..................................................................................................................................................2

2.3建筑场地的工程地质资料......................................................................................................................2

2.4材料选用..................................................................................................................................................3

2.5设计依据..................................................................................................................................................3 第三章 结构平面布置...........................................................................................................................................4

3.1结构方案..................................................................................................................................................4

3.2结构平面布置方案..................................................................................................................................4

3.3.1梁截面尺寸的初步设计..............................................................................................................4

3.3.2板厚大小的初步设计..................................................................................................................5

  1. 3.3柱截面尺寸的初步设计..............................................................................................................6

第四章 荷载计算...................................................................................................................................................8

4.1恒载计算..................................................................................................................................................8

  1. 1.1屋面恒荷载标准值......................................................................................................................8

4.1.2楼面恒荷载标准值......................................................................................................................8

4.1.3板底抹灰标准值..........................................................................................................................8

4.2楼梯的恒荷载的标准值..........................................................................................................................9

4.3楼面、屋面活荷载标准值......................................................................................................................9

4.4梁间荷载..................................................................................................................................................9

4.4.1墙的恒荷载标准值......................................................................................................................9

  1. 3.2梁间荷载......................................................................................................................................9

第五章 横向框架在竖向荷载作用下的计算简图.............................................................................................11

5.1计算简图................................................................................................................................................11

5.2传至节点的集中荷载的计算................................................................................................................11

  1. 2.1顶层............................................................................................................................................11

5.2.2标准层(2~5层).....................................................................................................................12

5.3荷载计算................................................................................................................................................14

5.3.1次梁上的荷载计算....................................................................................................................14

5.3.2CD跨均布荷载的计算(无次梁)............................................................................................15

5.4恒荷载和活荷载作用下横向框架的计算简图....................................................................................15

5.4.1恒荷载作用下横向框架的计算简图........................................................................................15

5.4.2活荷载作用下横向框架的计算简图........................................................................................16

5.5重力荷载计算........................................................................................................................................17

5.5.1重力荷载值的计算....................................................................................................................17

  1. 5.2重力荷载作用下横向框架的计算简图....................................................................................18

第六章 横向框架在竖向荷载作用下的内力分析.............................................................................................19

6.1恒荷载作用下的框架内力....................................................................................................................19

  1. 1.1弯矩计算....................................................................................................................................19

6.1.2横向框架在恒荷载作用下内力图的绘制............................................................................... 22

6.2活荷载作用下的内力图绘制................................................................................................................23

6.2.1弯矩计算....................................................................................................................................23

6.2.2横向框架在活荷载作用下的内力图绘制............................................................................... 23

6.3横向框架在重力荷载作用下内力图的绘制........................................................................................25

6.3.1弯矩计算....................................................................................................................................25

  1. 3.2横向框架在活荷载作用下的内力图绘制............................................................................... 25 第七章 横向框架在水平地震荷载作用下的内力和位移计算........................................................................ 37

7.1重力荷载代表值计算............................................................................................................................37

  1. 1.1第六层重力荷载代表值计算....................................................................................................37

7.1.2第五层重力荷载代表值计算(二到五层相同)................................................................... 39

7.1.3第一层重力荷载代表值计算....................................................................................................41

7.2水平地震作用和位移计算....................................................................................................................42

7.2.1框架梁及柱线刚度计算............................................................................................................42

7.2.2侧移刚度D的计算....................................................................................................................43

7.2.3结构基本自振周期的计算........................................................................................................44

7.2.4横向水平地震作用的计算........................................................................................................44

剩余内容已隐藏,请支付后下载全文,论文总字数:177572字

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图