登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 土木建筑类 > 土木工程 > 正文

连云港市某创业中心1号楼设计毕业论文

 2022-01-19 08:01  

论文总字数:60258字

摘 要

本毕业设计为连云港市某创业中心一号楼设计,按使用功能将建筑分为五层。楼房标高18.6m,总建筑面积3261.3m2

本工程结构设计采用五层框架结构,基本步骤为:结构选型与布置;计算简图及荷载计算;框架内力计算及内力组合;梁、柱截面设计、现浇楼面板的设计、楼梯结构设计、基础设计以及结构施工图的绘制等。其中,内力计算考虑四种荷载作用,即恒荷载、风荷载、活荷载以及地震作用;柱、板的设计采用弹性理论;楼梯选用板式楼梯;基础选用双柱联合基础和柱下独立基础。在进行截面抗震设计验算时,遵循了强剪弱弯,强柱弱梁,强节点弱构件的设计原则进行内力的调整,满足构造要求。

关键词:框架结构;内力;设计;配筋

ABSTRACT

This graduation project is No. 1 Building of Lianyungang City Entrepreneurship Center.According to the function, the construct consists of five layers. The building is 18.6 meters in height and the total floor area is 3261.3m2 .

Reinforced concrete frame structure is adopted in this engineering. The design includes Structure selection and layout;determination of structure calculating diagram; calculation of load; analysis of internal force;combination of internal force; reinforcement for beams and columns;the design of slab, stair and basemen-t; the drawing of structural working plan. Dead load, live load, wind load and earthquake action are considered. The design of beams is based on plastic analysis. Slab stair and strip foundation are selected in this design. In the seismic design, the design principle of “strong column and weak beam, strong shear an-d weak bending, strong joint week member” is obeyed. And the cross-section can meet the demand of construction.

Keywords: frame; internal force; design; reinforcement

目录

前 言 1

第1章 设计资料 1

1.1 设计标高 1

1.2 工程地质与水文地质资料 1

1.3 抗震资料 1

1.4 墙身做法 1

1.5 楼面做法 1

1.6 屋面做法 2

1.7门窗做法 2

1.8 活荷载 2

1.9 所用材料 2

第2章 结构布置及计算简图 3

2.1 结构布置 3

2.2 结构选型 3

第3章 荷载计算 5

3.1 恒荷载计算 5

3.2 风荷载计算 8

3.3 重力荷载代表值计算 9

第4章 内力分析 20

4.1 恒载作用下内力计算 20

4.3 活载作用下内力计算 26

4.4 风荷载作用下内力计算 34

第5章 内力组合 38

5.1弯矩调幅 38

5.2内力组合 39

5.3内力调整 47

第6章 框架梁、柱截面设计 51

6.1 框架梁的截面设计 51

6.2 框架柱的截面设计 59

第7章 板的结构设计 64

7.1 计算简图 64

7.2 楼面板设计 64

第8章 楼梯设计 68

8.1 平面布置图 68

8.2 梯段板设计 68

8.3 平台板设计 69

8.4 平台梁设计 70

第9章 基础设计 72

9.1 A柱独立基础设计 72

9.2 B、C双柱联合基础设计 75

第10章 PKPM计算 79

10.1 PKPM部分文本文件 79

10.2 风荷载信息 87

10.3抗震分析 88

10.4 大震下弹塑性层间位移角 89

10.5 结构分析及对比 91

第11章 结论 102

参考文献 103

致 谢 105

第1章 设计资料

1.1 设计标高

根据任务书要求,建筑的室内设计标高为±0.000,室内外的相对高差是450。

1.2 工程地质与水文地质资料

(1)根据任务书所给资料,地层自上而下共可划分为3层,各土层情况如下:

①素填土:颜色为褐灰色,湿度为稍湿,土层松散~稍密,成分以粉土为主,为新近堆积。该层土的场地均匀普遍分布,大约为0.5m厚。

②稍密卵石层:稍密卵石的粒径20~70mm,其中个别的卵石最大粒径大于90mm,卵石的分布比较均匀,含量为55~60%,大部分都不接触,约2.6m厚。

③密实卵石层:密实卵石的粒径大多为20~100mm,其中最大的粒径大于200mm,卵石的骨架含量为70%~80%,表现出交错排列,该层土本次钻探未钻穿。

请支付后下载全文,论文总字数:60258字

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图