Design of an office building in Nanjing of Jiangsu Province毕业论文
2021-12-27 08:12
论文总字数：107184字
Graduation project (Thesis) assignment
Topic | Design of an office building |
name | in Nanjing of Jiangsu Province |
Institute (Department) | College of Civil Engineering |
Speciality | Civil Engineering |
Full name | Kauanov Akzhol |
Student ID | L004160104 |
Date of departure | 2020.02-2020.06 |
Supervisor | 岳健广 |
2020.06.04
Abstract
This project is a practical application project of an office building design in Nanjing, Jiangsu Province. The single floor building area is about 924.72m2，, the main body is three spans and 8 floors, and the building area is about 7397.76m2. The main design scheme is a multi-layer reinforced concrete frame structure, a Class C building, the structural safety level is Grade II, and the design service life is 50 years. The attached are the drawings of the assignment for the general layout of the project and the layout of column network on the standard floor.
The main purpose of this project on how to design an office building in Nanjing. The research project contributes to understand the office building that every time designed in a good way in China, thus we are trying to learn more as much as possible. We search in literature review for a standard Office Building design for Architectural, Structural and Mechanical.
Contents
Chapter One
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Conclusion | ___________________________________________1 ___________________________________________1 ___________________________________________1 ___________________________________________1 ___________________________________________2 ___________________________________________2 ___________________________________________2 ___________________________________________2 ___________________________________________4 ___________________________________________5 ___________________________________________9 __________________________________________13 __________________________________________15 __________________________________________19 __________________________________________19 __________________________________________30 __________________________________________45 __________________________________________45 __________________________________________46 __________________________________________50 __________________________________________55 __________________________________________55 __________________________________________63 __________________________________________73 __________________________________________73 __________________________________________74 __________________________________________82 |
Chapter 1
1. Architectural Design in attachments
2. Structural Design
2.1 Cross sectional dimensions of beams and columns
Frame Beam:
L = 6000mm: h = () = h = 600;
= 250; b h = 250mm 600mm (transverse beam)
L = 2400mm: h = () = h = 400;
= 250; b h = 250mm 400mm (aisle beam)
L = 6000mm: h = () = h = 600;
= 250; b h = 250mm 600mm (longitudinal beam1)
L = 8400mm: h = () = h = 600;
= 250; b h = 250mm 600mm (longitudinal beam2)
L = 5400mm: h = () = h = 600;
= 250; b h = 250mm 600mm (longitudinal beam3)
L = 4200mm: h = () = h = 600;
= 250; b h = 250mm 600mm (longitudinal beam4)
Frame Column:
mm2 (for middle column)
请支付后下载全文，论文总字数：107184字
