登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 土木建筑类 > 土木工程 > 正文

东来尚城幼儿园教学楼毕业论文

 2021-08-31 11:08  

摘 要

本计算书是针对武汉理工大学土木工程与建筑学院土木工程专业2012级毕业设计“东来尚城幼儿园教学楼设计”所做的书面成果。本宿舍楼为三层钢筋混凝土框架结构。

在“建筑设计部分”中,主要针对设计初期的几个建筑方案从各个方面对他们进行比较,并确定最终的方案,确定其具体的建筑构造,做法和材料。

在结构设计部分中,首先确定第⑤轴的横向框架作为本次手算的任务,并最终选择方案,确定其具体所受的荷载,其中包括恒荷载,活荷载,风荷载,地震作用,计算梁柱板与内力进行组合后得到各截面的控制内力,最后进行各构件的配筋计算

此外,还进行了结构方案中的室内楼梯设计,完成梯段板,平台板,平台梁等构件的内力计算和配筋计算及施工图绘制。根据工程地质资料,结构采用独立基础

结构设计过程中前30天的时间是先用建筑结构设计软件PKPM对整个结构进行计算,然后在后一个月的时间里选一榀具有代表性的框架进行手算,这样既使自己掌握了PKPM软件的基本应用,同时能是自己对本科四年所学的东西有一个很好的回顾。并把手算与电算的结果进行对比,使自己对框架结构的受力有一个更明确的目的。

关键词:毕业设计,教学楼,钢筋混凝土框架结构,抗震设计,独立基础

Abstract

The written achievement which the teaching buildings of Donglaishangcheng kindergarten design abstract this account book aims at Wuhan University of Technology civil engineering specialized 2012level of graduation project .This teaching building is three reinforced concrete construction.

In the architectural design part, mainly aims at the design initial period several building plan to carry on the comparison from each aspect to them, finally and chooses the plan, has determined its concrete construction structure, the procedure and the material.

In the structural design part, first determined the fifth axle crosswise frame the duty which calculated for this hand, is clear about its computation diagram and each computation parameter; Then according to the building procedure determined its receives the dead load, the live load, the wind load, the earthquake function, after the computation beam column board and the foundation endogenic force carries on the combination to obtain various sections control endogenic force;

Finally carries on various components to match the muscle computation in addition, but also has carried on in the structure plan room the staircase design, has completed component and so on carriage board, even platen, platform Liang inside computations and matches the muscle computation and the construction drawing plan basis engineering geology material, the structure uses the independent foundation in the structural design process,

The part auxiliary carries on the electricity by “PKPM” to calculate, guaranteed the computation achievement the reliability, and achieved together calculated the achievement carries on the contrast analysis the goal.

Key Word: Graduation project; teaching building; reinforced concrete,;earthquake resistance design,;independent foundation

目 录

绪 论 ……………………………………………………………………………………………………………………………………….1

1 设计资料 …………………………………………………………………………………………………………………………..……2

1.1 工程名称…………………………………………………………………………………………………............................2

1.2 工程概况…………………………………………………………………………………………………………………………….2

1.3 建筑等级…………………………………………………………………………………………………………………………….2

1.4 设计荷载…………………………………………………………………………………………………………………………….2

1.5 抗震设防…………………………………………………………………………………………………………………………….2

1.6 气象资料…………………………………………………………………………………………………………………………….2

1.7 地质资料…………………………………………………………………………………………………………………………….2

1.8 材料选用…………………………………………………………………………………………………………………………….2

2 结构选型…………………………………………………………………………………………………………………………………2

2.1 柱网布置…………………………………………………………………………………………………………………………….2

2.2 框架结构承重方案的选择………………………………………………………………………………………………….2

2.3 计算单元选取……………………………………………………………………………………………………………………..2

2.4 梁、柱截面尺寸的初步估计……………………………………………………………………………………………5

2.4.1 梁截面初选(⑤轴)…………………………………………………………………………………………………… 5

2.4.2 柱截面初选(⑤轴)…………………………………………………………………………………………………….6

3 侧移刚度的计算…………………………………………………………………………………………………………………….7

3.1 梁线刚度ib的计算(I=2I0)……………………………………………………………………………………………..8

3.2 柱线刚度ic的计算(I=I0)………………………………………………………………………………………………… 8

3.3 相对线刚度计算………………………………………………………………………………………………………………8

4 恒荷载作用下内力计算…………………………………………………………………………………………………….9

4.1 恒荷载标准值计算…………………………………………………………………………………………………………..9

4.2 恒载作用下框架的所受荷载……………………………………………………………………………………………11

4.2.1框架梁的恒载…………………………………………………………………………………………………………………..12

4.2.2柱纵向集中恒荷载计算……………………………………………………………………………………………………17

4.3 恒载作用下框架的内力计算……………………………………………………………………………………………20

5活荷载标准值计算…………………………………………………………………………………………………………………29

5.1活荷载标准值………………………………………………………………………………………………………………………29

5.2活载作用下框架所受荷载…………………………………………………………………………………………………..29

5.2.1屋面与楼面活载……………………………………………………………………………………………………………….29

5.2.2柱的集中力……………………………………………………………………………………………………………………….31

5.3 活载作用下框架的内力计算……………………………………………………………………………………………32

6 风荷载作用……………………………………………………………………………………………………………………………37

6.1 风荷载标准值…………………………………………………………………………………………………………………..37

6.2 侧移刚度D……………………………………………………………………………………………………………………….40

6.3 风荷载作用下框架侧移计算……………………………………………………………………………………………40

6.4 框架柱的剪力分配计算……………………………………………………………………………………………………41

6.5 框架柱反弯点高度的计算………………………………………………………………………………………………..42

6.6 框架柱端的剪力弯矩及梁端的弯矩计算…………………………………………………………………………43

7 水平地震荷载作用………………………………………………………………………………………………………………..46

7.1 重力荷载代表值的计算……………………………………………………………………………………………………46

7.1.1顶层重力荷载代表值……………………………………………………………………………………………………….46

7.1.2标准层重力荷载代表值……………………………………………………………………………………………………47

7.1.3二层重力荷载代表值……………………………………………………………………………………………………….47

7.1.4底层重力荷载代表值……………………………………………………………………………………………………….47

7.2 水平地震作用力的计算(基底剪力法)………………………………………………………………………..47

7.3 水平地震作用下框架的侧移验算…………………………………………………………………………………….49

7.4 水平地震作用下框架内力计算(D值法)……………………………………………………………………..49

8 荷载和内力组合…………………………………………………………………………………………………………………….54

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图