登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 土木建筑类 > 给水排水工程 > 正文

某镇给水处理工程设计毕业论文

 2022-04-17 10:04  

论文总字数:39105字

摘 要

关键词自然状况,工艺流程 水源现状 选泵与电机 构筑物尺寸与布置 水厂各构筑物高程 设计要求和参考文献。

A town located in the southern margin of the north temperate zone, is a warm temperate to subtropical transition zone, belongs to the warm wet monsoon climate. Climate resources are rich, sufficient sunlight belong to the water supply design of high light area, one hundred thousand tons of water, its design process using mechanical flocculation, advection precipitation, v-shaped filtration process, liquid chlorine disinfection process, the content of the design: 1 natural condition of industrial grade 2 water quality is better 3 water quality present situation of water flood 2.4 M 4.4 M low water level and water engineering the most disadvantageous pipeline pump station 3 water damage, pipe layout and each section head loss, pump selection and matching of the motor selection, calculation of the pressure of backwash water storage and the design of the water recoil water hydraulic pressure required calculation of liquid chlorine storage, calculation models of delivery equipment 5 water treatment works design and arrangement of the size of the various structures and 6 general arrangement of water treatment works, 7 waterworks each elevation design of structures. Its design technical requirements, and its reference documents.

Keyword natural conditions, technological process source selected the pump and motor structure size and layout of waterworks in various structures elevation design requirements and reference.

目录

1 自然状况 4

1.4 设计内容 5

2 给水水源及取水工程 6

2.1 给水水源 6

2.1.1 给水水源的选择原则 6

2.1.2 给水位置选择 6

2.2 取水构筑物 6

2.3 取水泵站(一级泵站) 7

2.3.1 主要设计资料 7

2.3.2 集水井设计 7

2.3.3 泵站设计 10

3 净水厂设计 14

3.1 设计规模及处理工艺的确定 14

3.2 加药间及药剂仓库的设计 15

3.2.1 加药间计算 15

3.2.2 药剂仓库的计算 16

3.3 混合方式 17

3.5.1 平流式沉淀池的优缺点 17

3.5.2 平流式沉淀池主要设计要点 17

3.5.3 设计主要参数 18

3.5.4 设计计算 18

3.5.5 进出水系统 19

3.5.6 排泥设备选择 21

3.6 V型滤池的设计 21

3.6.1 V型滤池的工作特点 22

3.6.3 主要设计参数 22

3.6.4 V型滤池的设计计算 23

3.7 清水池计算 35

3.7.1 清水池平面尺寸计算 35

3.7.2 管道系统 36

3.7.3 清水池布置 38

3.8 消毒 39

3.8.1 设计计算 39

3.8.2 加氯间布置 40

3.9.1 送水泵站设计流量 40

3.9.2设计扬程 41

3.9.3水泵的选择 41

3.9.4 电机的选择 42

3.9.5基础间距与基础尺寸 42

3.9.6 管路布置及管道计算 43

3.9.7 二级泵房布置 44

3.9.8 吸水井设计计算 44

3.9.9 吸水管路和出水管路中水头损失的计算 46

3.9.10 泵站工艺设计 47

3.9.11 附属设备的选择和布置 48

3.9.12 泵房建筑高度及平面尺寸的计算 49

4 净水厂总体布置 50

4.1 给水厂的流程及平面布置 50

4.1.1 水厂流程 50

4.1.2 水厂平面布置 50

4.2 给水厂高程布置 51

4.2.1 水厂高程布置 51

4.2.2 各构筑物之间损失的计算 52

4.3 附属建筑 53

4.4水厂内道路及绿化 54

结束语 54

参考文献 55

1 概述

1 自然状况

某镇位于北温带南缘,是暖温带向亚热带过渡地区,属暖湿性季风气候。气候资源较为丰富,光照充足,属高光照区。历年平均气温13.8℃,年际最大差值2.1℃。境内雨量充沛,历年来境内平均降水量949.9毫米,平均降水量最高的月份是7月,为240毫米,平均降水量最少的月份是12月,为15.1毫米。

全境地处季风区,年平均风速为3.3米/秒。春季以东北风-东南东风为主;夏季以东南风和南南东风为主;秋季以北东风、东北东风为主;冬季以北北东风-北东风为主。

境内年均蒸发量最高的月份是5月,总量平均是188.3毫米,蒸发量最少的月份是1月,总量平均是45.4毫米,干旱指数为1.6,属半湿润区。年均相对湿度为75%,最高年份为79%,最低年份为71%。

根据《建筑抗震设计规范》(GB50011-2010),抗震设防烈度为6度,设计基本地震加速度值0.05g,地震分组为第三组。

请支付后下载全文,论文总字数:39105字

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图