登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 土木建筑类 > 给排水科学与工程 > 正文

扬州开发区商务办公大楼建筑给排水设计毕业论文

 2022-05-02 10:05  

论文总字数:27495字

摘 要

本设计为某高层重要办公楼,属于一类公共建筑,主要设计数据:该建筑总标高59.10米,室外地面标高为-0.70米;地下一层为设备用房、停车库;地上全部为办公。

给水系统采用分区给水,一至四层为低区,由市政压力直接供水;五层至十层为中区,十一至十六层为高区,中、高区由地下一层泵房的箱式无负压设备供水。排水采用污废水合流。消火栓系统竖向不分区,室外消火栓用水量30L/s,室内消火栓用水量40L/s,火灾延续时间2h。消火栓充实水柱高度13m,水龙带长度25m,水枪喷嘴流量5L/s,消防立管管径为DN100。在屋顶层设试验消火栓一个,每个室内消火栓箱内均设有远距离启动消防泵的按钮。

该建筑采用湿式自动喷水灭火系统,设置五个湿式报警阀,地下车库按民用建筑中危险级Ⅱ级设计,地上统一按民用建筑中危险级Ⅰ级设计。喷淋系统设计流量40L/s。报警阀设于地下室泵房内,各层均设水流指示器、末端试水装置和信号阀,其信号均送入消防控制中心进行处理。选用箱泵一体化消防增压稳压设备(包含18立方米消防水箱)贮存火灾初期10min自动喷水灭火系统、室内消火栓系统用水量,初期灭火由水箱供水,后期灭火由地下室的消防水泵和喷淋泵供水。

关键字:高层建筑,消火栓系统,自动喷水灭火系统

ABSTRACT

The design is a commercial and resident high-rise building, first scale public building.Main design datas: 59.10 m (the total height), -0.70 meters (the elevation of outside ground); The equipment and parking space are arranged at the first minus floor; the first to the sixteen floor in annex building are working place.

Water distribution system adopts the way of the regional water supply, the annex building belongs to the low section, supplying water from the municipal pressure directly.The5-10th floor belongs to the middle section, and the11-16th floor is the high section.The middle and high sections’water is supplied by the pump setup on the first minus floor. The way of drainage water is different between the annex building and the commercial one,outdoor fire hydrant water 30L/s, 40L/s fire hydrant water consumption, fire life 2h. 13m fire hydrant full water column height, hose length 25m, 5L/s water gun nozzle flow, fire the riser tube diameter DN100. Set up a test fire hydrants in roofing, each fire hydrant boxes are equipped with remote start button for fire pump.
Wet automatic fire sprinkler system in the building,it set up five valve can give an alarm when there is fire, the baseroom designed with dangerous level Ⅱ,another floor designed with dangerous level Ⅰ. spraying system design flow 40L/s. The alarm valve located on the pump room in the basement, the floors are located water flow indicator, test water device and signal the valve at the end, its signal is fed into the fire control centre for processing. Selection box-pump fire booster regulator device integration (including 18 cubic metres of fire water tank) storage initial 10min sprinkler system for fire water, indoor fire hydrant system, initial fire-fighting water tank water supply, late extinguishing the fire pump and sprinkler pumps water from the basement.

KEY WORDS:High-rise building, Hydrant system,Sprinkler system

目 录

第一章 设计说明书

一、给水系统 7

1.1给水方案 7

1.1.1方案选择 7

1.2给水系统组成 8

1.3给水管道的布置与敷设 8

二、消防系统 9

2.1室内消火栓系统 9

2.1.1室内消火栓系统的选择 9

2.1.2系统组成 10

2.1.3设备及构筑物 10

2.1.4消火栓的安装 10

2.2自动喷淋系统 10

2.2.1室内自动喷水灭火系统的选择 11

2.2.2系统组成 11

2.2.3喷头的选择与布置 11

2.2.4设备及构筑物 12

2.2.5喷淋系统的安装 12

三、室内排水系统 13

3.1系统选择 13

3.2系统组成 13

3.3主要设备及构筑物 14

3.4排水管道安装要求 14

四、雨水系统 14

4.1雨水排水系统的选择 14

4.2雨水排水系统的组成 14

4.3雨水管道的敷设与布置 14

第二章 设计计算书

一、给水系统计算 15

1.1生活用水量计算 15

1.2设计计算依据 16

1.3设计计算 16

1.4设计秒流量的确定 17

1.5水表的选择 17

1.6生活给水系统水力计算 18

1.6.1设计依据 18

1.6.2卫生间给水水力计算 19

1.6.3低区水力计算 22

1.6.4中区水力计算 23

1.6.5高区水力计算………………………………………………………………………… 24

1.7地下室生活水泵的选择 25

1.8低区给水系统所需压力校核 27

二、室内消火栓给水系统的计算 27

2.1消防水池 27

2.1.1消防水池的设置 27

2.1.2体积计算 28

2.2屋顶消防水箱 29

2.3消火栓保护半径 29

2.4消火栓系统设计 30

2.5消火栓的确定 31

2.6消火栓的水力计算 31

2.7水泵接合器选定 34

三、自动喷水灭火系统 34

3.1自动喷淋灭火系统的基本数据 34

3.2管道与报警阀布置 34

3.3喷头的选用与布置 34

3.4系统的设计流量 35

3.5水力计算(作用面积法) 35

3.6水泵接合器 37

四、室内排水系统的设计与计算 37

4.1横支管的计算 37

4.2立管计算 40

4.3集水坑及提升泵计算选型 40

4.3.1地下室车库集水坑计算 41

4.3.2消防电梯集水坑及提升泵计算选型 41

4.3.3水泵房集水坑及提升泵计算选型 41

4.3.4汽车坡道集水坑及提升泵计算选型 42

五、建筑雨水排水系统的设计与计算 42

5.1降雨强度 42

5.2汇水面积 42

5.3设计秒流量 43

5.4雨水斗选用 43

5.5连接管计算 43

5.6排出管计算 44

参考文献 45

结语 46

谢辞 47

第一章 设计说明书

一、给水系统

1.1给水方案

1.1.1方案选择

按照GB50015-2003《建筑给排水设计规范》规定:高层建筑生活给水系统应竖向分区,竖向分区应符合下列条件:

请支付后下载全文,论文总字数:27495字

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图