登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 土木建筑类 > 建筑环境与设备工程 > 正文

宁海中学教师公寓设计(团队)-空调通风工程设计毕业论文

 2022-04-19 06:04  

论文总字数:70363字

摘 要

本设计为宁海中学教师公寓空调通风设计,总建筑面积13300平米,地上建筑面积11000平米,地下2300平米,占地面积1250平米。地下一层为汽车库和设备间,地上一层为超市,地上二层到十层为教师公寓间。

本设计负荷计算方法采用非稳态方法计算冷负荷,地上一层采用全空气系统,二至十层采用风机盘管加新风系统。空调水系统选择闭式、同程、两管制、变流量、一次泵系统。本工程采用地源热泵作为冷热源,选用两台普通型R22-LSBLGR250S地源热泵螺杆机组,采用地埋管加闭式冷却塔辅助散热的冷却方式,机房设置在地下一层。地下一层设备间及汽车库单独设置通风和防排烟系统。

本设计为团队设计,与土建、水、电专业协同完成。利用BIM技术,在施工图的基础上进行建模,实现风管、水管及设备等可视化,利用BIM技术进行碰撞模拟,实现团队间协调与优化,最终完成深化模型集成。

关键词:冷负荷 全空气系统 风机盘管 水力计算 冷热源

Ninghai Middle School Teachers Apartment design (team) - air conditioning and ventilation engineering design

Abstract

The design is the air conditioning and ventilation design for Ninghai middle school teachers apartment, total construction area of 13300 square meters, ground floor area of 11000 square meters, 2300 square meters underground, covers an area of 1250 square meters. Underground layer for the garage and equipment room, ground floor for the supermarket, ground layer 2 to 10 for the teachers apartment.

Load calculation cooling load is obtained by using the unsteady method in this design. On the ground floor adopt full air system, two to ten layers use fan-coil unit plus fresh air system. Air conditioning water system is designed as a closed, the same way, two control, variable flow, a pump system. The selection of the project’s cold and heat source is ground source heat pump, two common type R22-LSBLGR 250S ground source heat pump screw units are chosen, choosing buried pipe with closed cooling tower auxiliary cooling method, cold and heat source room is set in the ground floor. Ventilation and smoke control system are provided between the garage and equipment room separately.

This design is a team design, completed collaboratively with the construction, water, electricity professional. Based on the construction drawing, the BIM technology is used for modeling to make blast pipe, water pipe and other equipments visualized. The BIM technology is used for crash simulations to achieve inter-team coordination and optimization and complete the deepening integration model finally.

Key Words: cooling load; Full air system; Fan coil; Hydraulic Calculation; Cold and heat source

目 录

摘 要 I

Abstract II

第一章 设计概况 1

1.1 工程概况 1

1.2 原始资料 1

1.2.1 围护结构参数 1

1.2.2 照明功率 2

1.2.3 电气设备使用功率 2

1.2.4 人员密度 2

1.2.5 空调使用时间 2

1.3 室外气象参数 3

1.4 空调室内设计参数 3

1.5 设计新风量 3

第二章 空调负荷计算 5

2.1 冷负荷计算 5

2.1.1 外墙冷负荷 5

2.1.2 外窗冷负荷 6

2.1.3 室内热源散热量 7

2.1.4 内墙冷负荷 8

2.1.5 教师公寓间1冷负荷汇总 8

2.2 热负荷计算 9

2.2.1 相关房间采暖热指标参考值 9

2.2.2 各房间热负荷 9

2.3 湿负荷及热湿比计算 9

第三章 空气处理方案论证 11

3.1 空调系统的分类 11

3.1.1 按空气处理设备的集中程度分 11

3.1.2 按承担室内负荷所用的介质分 11

3.2 空调方案比较 11

3.3 空调方案的确定 13

3.4 空调系统的划分及确定 14

第四章 空调送风量计算校核及设备选型 15

4.1 送风量计算及房间空调状态校核 15

4.1.1 全空气一次回风系统送风量及冷量计算 15

4.1.2 风机盘管 新风系统送风量及冷量计算 16

4.2 空调设备选型 18

4.2.1 组合式空调机组选型 18

4.2.2 风机盘管选型 18

4.2.3 新风机组选型 19

第五章 气流组织计算 20

5.1 散流器送风房间 20

5.1.1 空调系统一超市 20

5.1.2 空调系统二至九走廊(送新风) 21

5.1.3 空调系统十走廊(送新风) 22

5.2 侧送风房间 22

第六章 风管水力计算 26

6.1风管水力计算的步骤 26

6.2 全空气系统风管水力计算 26

6.2.1 送风管水力计算 26

6.2.2 回风管水力计算 28

6.2.3 新风管水力计算 29

6.3 新风系统风管水力计算 29

6.3.1 二至九层新风系统风管水力计算 29

6.3.2 十层新风系统风管水力计算 29

第七章 空调水系统设计计算 31

7.1 水系统的比较选择与划分 31

7.2 供回水管水力计算 32

7.3 凝水系统水力计算 34

第八章 冷热源选择及设计计算 36

8.1 冷热源选择及确定 36

8.2 空调冷源容量计算 37

8.2.1 空调系统夏季冷负荷 37

8.2.2 冷水通过水泵、管道、水箱等部件的温升引起的附加冷负荷之和 38

8.3 地源热泵系统设计 39

8.3.1 地源热泵系统负荷计算 39

8.3.2 地源热泵机组选型 40

8.3.3 地埋管系统设计计算 40

8.3.4 地源热泵系统布置及水力计算 44

第九章 制冷机房设备选择 46

9.1 冷却塔的选择计算 46

9.2 水泵的选择计算 47

9.2.1 机房内管路水力计算 47

9.2.2 冷冻水泵的选择 50

9.2.3 冷却水泵的选择 51

9.3 分水器和集水器的选择 51

9.4 水过滤器的选择 53

9.5 水系统的补水、定压和膨胀 54

第十章 地下通风与防排烟设计 55

10.1 地下车库通风设计 55

10.2 地下车库防排烟设计 56

10.3 地下车库通风及防排烟设备选型 57

10.3.1 送风风机选型 57

10.3.2 排风风机选型 57

10.4 设备房通风设计 57

10.5设备房风机选型 58

10.5.1 变电站风机选型 58

10.5.2 水泵房和制冷机房风机选型 58

第十一章 消声与隔振 60

11.1 消声设计 60

11.2 减振设计 60

第十二章 保温与防腐 61

12.1 保温设计 61

12.2 防腐设计 61

参考文献 62

附表一 冷负荷汇总表 63

请支付后下载全文,论文总字数:70363字

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图