登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 理工学类 > 工程力学 > 正文

装配式具中横隔梁钢筋混凝土T型截面简支梁桥设计毕业论文

 2021-04-21 11:04  

摘 要

本次设计内容为装配式具中横隔梁钢筋混凝土T型截面简支梁桥设计,计算跨径25m,计算荷载为公路Ⅰ级荷载,附人行道,说明书主要对桥梁各部分的结构和计算过程进行设计说明。

首先对上部结构,包括桥垮主梁结构,桥面,人行道,横隔梁以及其他一些细部结构进行结构设计,再通过相应内力计算,进行配筋设计,最后进行强度,应力,变形等验算。然后对于下部结构,包括支座,桥墩,基础,地基的结构设计,同样通过内力计算对其进行配筋计算,进行强度,稳定性和偏心距等验算,保证所有设计内容合乎规范要求,且在计算过程中加入相应计算示意图和表格。同时应用AUTOCAD绘图软件绘制各构件的结构详图和配筋图。

关键字:简支梁桥;结构设计;内力组合;截面配筋;验算

Abstract

The design content of this design is a simple-supported girder bridge with cross-beams and reinforced concrete T-sections. The span is calculated to be 25m. The calculated load is a grade I road load, with sidewalks. The instructions mainly describe the structure and calculation process of each part of the bridge make design instructions.

The structural design of the superstructure, including the bridge girder main beam structure, bridge deck, sidewalks, cross-beams and other detailed structures, is performed first, then the reinforcement design is performed through corresponding internal force calculations, and strength, stress, deformation and other calculations are performed. Then for the substructure, including the structural design of bearings, bridge piers, foundations, and foundations, reinforcement calculations are also performed through internal force calculations, and strength, stability, eccentricity, and other calculations are performed to ensure that all design contents conform to the specification requirements and The corresponding calculation diagrams and tables are added to the calculation process. At the same time, application of AUTOCAD drawing software to draw the structural details of each component and reinforcement map.

Keywords: simple-supported beam bridge; structural design;

internal force combination; section reinforcement; verification

目录

第1章 绪论 1

第2章 主梁设计 2

2.1主梁结构设计 2

2.1.1主梁布置 2

2.1.2主梁尺寸及材料 2

2.1.3横隔梁尺寸及材料 2

2.1.4桥面设计 2

2.2主梁结构内力计算 3

2.2.1主梁恒载内力计算 3

2.2.2主梁活载内力计算 5

2.2.3内力组合 16

2.3主梁配筋 19

2.3.1主梁正截面配筋计算 19

2.3.2主梁斜截面配筋计算 21

2.3.3正截面及斜截面验算 23

2.3.4构造要求及钢筋汇总 24

2.4主梁验算 24

2.4.1活载挠度验算 24

2.4.2预拱度计算 25

2.4.3裂缝验算 25

第3章 横隔梁设计 27

3.1确定作用在中横隔梁上的计算荷载 27

3.2绘制中横隔梁内力影响线 27

3.3横隔梁内力计算 29

3.4横隔梁配筋 30

3.4.1中横隔梁配筋 30

3.4.2端横隔梁配筋 31

3.5横隔梁连接 32

第4章 桥面板设计 33

4.1桥面板内力计算 33

4.1.1恒载及其内力计算 33

4.1.2活载及其内力计算 33

4.1.3内力组合 35

4.2桥面板配筋 35

4.3人行道设计 36

4.3.1荷载计算及内力组合 36

4.3.2人行道配筋 37

4.4栏杆配筋 37

第5章 弧形钢板支座设计 38

5.1确定支座反力 38

5.2确定垫板尺寸 38

5.2.1平面尺寸 38

5.2.2垫板厚度 39

5.2.3下垫板的弧面半径 39

5.3验算齿板抗剪强度 39

第6章 桥墩设计 41

6.1桥墩结构设计 41

6.1.1墩帽尺寸 41

6.1.2墩身尺寸 42

6.2重力式桥墩验算 42

6.2.1计算截面选择 42

6.2.2荷载计算统计 42

6.2.3墩身强度验算 43

6.2.4偏心距验算 46

6.2.5墩顶水平位移验算 48

第7章 基础设计 49

7.1确定基础埋深 49

7.2基础底面尺寸设计 49

7.2.1拟定基础平面尺寸 49

7.2.2基础底面承载力验算 50

7.2.3沉降验算 50

7.3基础设计 50

7.3.1确定基础高度 50

7.3.2基础配筋 52

7.4基础稳定性验算 54

7.4.1抗倾覆稳定性验算 54

7.4.2抗滑移稳定性验算 54

参考文献 56

致 谢 58

第1章 绪论

桥梁隶属于土木工程中的路桥工程。他不仅是一个国家和地区的经济实力,科技实力和生产力的综合体现,更加显示出了一个国家或地区历史,文化和文明等社会发展的进步程度。

随着我国国民经济的迅猛发展和经济全球化的影响日益扩大,大力发展交通运输事业,对于发展国民经济,提高人民生活水平,巩固国防等方面,都具有非常重要的作用,特别是在改革开放以来,路桥的建设得到了飞速的发展,进而拉动了经济的迅速增加。桥梁是陆路交通线中的重要组成部分,尤其对于一些大型桥梁,跨河桥梁来讲,更是扼住了交通的咽喉,这些对经济发展,国防建设等都会产生重大影响。而一些中小跨径桥梁或城市桥梁,对人民的生产生活也有着不言而喻的重要性。

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图