登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 理工学类 > 工程力学 > 正文

富力桃园住宅楼建筑结构设计毕业论文

 2021-03-31 08:03  

摘 要

框架结构是当前建筑设计采用较多的结构类型,具有结构布置灵活、自重轻、节省材料等优点。但框架结构侧移刚度比较小,当建筑层数较多时,在水平力作用下会产生较大的水平位移,引起构件破坏,影响使用。所以框架结构的建筑一般不超过15层。本次富力桃园住宅楼建筑结构设计项目,层数只有6层,7度抗震设防也满足设计要求,具备较高的实用性,经济性。

本工程项目为整体现浇钢筋混凝土框架结构,为建在武汉市的富力桃园住宅楼建筑结构设计,属于居住建筑,总建筑面积约为3600m2,建筑设计层数为6层,抗震烈度为6度,基本风压0.5kN/m2,地面粗糙度为B类,基础场地类别为II类,建筑重要性类别丙类,使用年限为50年,采用柱下独立基础。

首先,根据建筑功能要求、建筑层数、抗震等级和当地地质条件情况,确定主体采用框架结构,再根据框架结构的特点、受力特征和工程地质条件确定采用柱下独立基础,确定结构设计方案。

其次,根据结构尺寸,查阅混凝土建筑设计规范,初步确定各构件的截面尺寸,初步确定计算简图,根据结构的特点及实际受力情况等因素修正计算简图,确定结构计算简图。

然后,根据荷载规范确定,完成荷载统计;并根据不同状态下的极限进行内力组合,选择出一品框架进行计算,对控制界面进行配筋设计,完成结构分析和设计计算。

最后,书写设计计算书,根据计算的配筋结果和配筋布置,以及相关的规范完成配筋图和施工图的绘制。

关键词:住宅楼;框架结构;内力组合;抗震等级

Abstract

Frame structure is the current architectural design using more types of structures, with flexible structure, light weight, saving materials and so on. But the lateral stiffness of the frame structure is relatively small, when the number of building layers, in the horizontal force will produce a greater horizontal displacement, causing damage to components, affecting the use. So the frame structure of the building is generally not more than 15 layers. The R amp; F Taoyuan residential building structure design projects, the level of only 6 layers, 7 degrees seismic fortification also meet the design requirements, with a high practicality, economy.

The project is a whole cast-in-place reinforced concrete frame structure. It is a residential building with a total building area of 3600m2, a building design layer of 6 floors and a seismic intensity of 6 degrees. , The basic wind pressure 0.5kN / m2, the ground roughness for the B class, the basic site type II, building importance category C, the useful life of 50 years, using the column under the independent basis.

First of all, according to the architectural function requirements, building layers, seismic grade and local geological conditions, to determine the main frame structure, and then according to the characteristics of the frame structure, force characteristics and engineering geological conditions to determine the use of independent base under the column to determine the structural design The

Secondly, according to the structural size, the concrete building design specifications are consulted, and the cross-sectional dimensions of each component are preliminarily determined. The calculation diagram is initially determined, and the structural calculation diagram is determined according to the characteristics of the structure and the actual force.

Then, according to the load specification to determine the completion of load statistics; and according to the limits of different internal forces within the combination, select a product frame to calculate the control interface for reinforcement design, complete structural analysis and design calculations.

Finally, write the design calculations, according to the calculation of the reinforcement results and reinforcement layout, as well as the relevant specifications to complete the reinforcement map and construction drawing.

Key words: residential building; frame structure; internal force combination; seismic grade; reinforcement

目录

第1章 绪论 1

第2章 荷载统计及其框架内力分析 2

2.1 设计资料 2

2.2 结构选型 3

2.3 梁柱截面尺寸估算及确定计算简图 3

2.3.1梁柱截面尺寸估算 3

2.3.2确定框架计算简图 3

2.4 荷载统计 4

2.4.1恒载标准值 4

2.4.2活载标准值 6

2.5 竖向荷载作用下框架受荷分析 6

2.6风荷载标准值计算 11

2.6.1柱抗侧移刚度D的计算 11

2.6.2风荷载作用下位移验算 13

2.7 水平地震作用计算 14

2.8内力计算 16

2.8.1 恒载标准值作用下的框架内力计算 16

2.8.2 活载标准值作用下的框架内力计算 27

2.8.3 横向风荷载作用下的框架内力计算 30

2.8.4 地震荷载作用下的框架内力计算 45

2.9 内力组合 51

2.9.1 竖向荷载作用下梁端弯矩调幅计算 51

2.9.2内力组合 53

第3章 截面设计与配筋计算 57

3.1 梁柱截面设计与配筋计算 57

3.1.1 框架柱截面设计 57

3.1.2 框架梁截面设计 63

3.2 楼面板设计 68

3.2.1 楼面板荷载计算 68

3.2.2 配筋计算(按塑性理论计算) 68

3.3 楼梯设计 70

3.3.1 踏步板(TB—1)计算 71

3.3.2 楼梯斜梁(TL-1) 72

3.3.3 平台板计算(TB-2) 73

3.3.4 平台梁计算(TL-2) 74

3.4 基础设计 76

3.4.1 作用于基础顶面上的荷载计算 76

3.4.2 基础底面尺寸及埋深 78

3.4.3 基础高度验算 78

3.4.4 基础底板配筋 80

第4章 结束语 82

参考文献 83

致谢 84

第1章 绪论

本工程项目为建在武汉市的富力桃园住宅楼建筑结构设计,主体为现浇钢筋混凝土框架结构,属于居住建筑,建筑层数为6层,总建筑面积约为3600m2,地面粗糙度为B类,抗震烈度为6度。基本风压0.5kN/m2;基础场地类别为II类;建筑重要性类别丙类;设计使用年限为50年;采用柱下独立基础。

这个设计的目的在于总结本科四年所学的知识,检验学习成果。在设计过程中,我们要用到大量土木工程知识,例如《结构力学》、《混凝土设计原理》、《高层结构分析》、《土力学与地基基础》等,借助各类规范,在老师的指导下完成毕业设计计算书,并绘制建筑施工图和结构施工图。我们在设计过程中,需要熟练掌握CAD,pkpm,tssd,结构力学求解器等软件。

通过这次的毕业设计,我们对大学所学的知识进行了复习整理,对建筑结构设计的过程有了更深一步的了解。这次毕业设计,是我们总结知识的方法,也是我们检验自身能力的重要方式。

第2章 荷载统计及其框架内力分析

2.1 设计资料

  1. 工程名称:富力桃园住宅楼建筑结构设计
  2. 地点:武汉市
  3. 概况:总建筑面积约为3600mm2,总高19.5m,层数为6层,层高3m,室内外高差为1.5m。

图2.1 部分结构平面布置图

  1. 基本风压 W0=0.5kN/m2
  2. 抗震烈度为7度

(6)混凝土:梁板柱采用C30混凝土,楼梯、基础采用C20混凝土。

钢筋:梁柱纵向钢筋HRB400,其余采用HPB300。

2.2 结构选型

结构类型采用整体试现浇钢筋混凝土框架结构,屋面为100mm厚现浇钢筋混凝土板屋盖,楼面100mm厚现浇钢筋混凝土板,采用梁板式楼梯,采用柱下独立基础[1]

2.3 梁柱截面尺寸估算及确定计算简图

2.3.1梁柱截面尺寸估算

  1. 柱截面b=(1/12-1/18)H[2],H=4.5m,选柱截面b=h=500mm。
  2. 梁截面高度:h=1/8-1/14l0。l0,max为6900mm,因此梁高度h=600mm。矩形梁的高宽比h/b一般取2.0-2.5[3],因此梁宽度b=300mm。

2.3.2确定框架计算简图

计算简图如图2.2所示,取①号轴上的一榀框架计算[4]。边框架梁取I=1.5I0[5]

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图