登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 理工学类 > 电气工程及其自动化 > 正文

出租车计价器系统设计

 2023-10-25 09:10  

论文总字数:14523字

摘 要

计价器是当代社会出租车行业中确保司机与乘客之间能进行快速准确交易的重要工具。缺少计价器,两者之间的资源置换将寸步难行。因此,对计价器的系统设计有着重大研究意义。本文围绕51单片机对计价器进行设计说明。单片机结构简单,使用方便,可靠性高,能够通过软件编程实现功能转换,避免机械开关的复杂不稳定性,相比其它数字模拟电路的结构复杂,调试困难,故障率高,单片机系统的优势显而易见。本设计使用电机模拟发动机,采用AT89C52单片机、DS1302时钟芯片、A3144霍尔传感器、LCD1602液晶显示屏、AT24C02数据芯片等器件,分别组成电路中的单片机最小系统模块、计时模块、计程模块、显示模块以及储存模块。模拟在车辆行驶过程中,计价器实现里程采集以及费用计算等功能。本设计能在白天黑夜分别按不同的价格标准对里程或时间计价。

关键词: 计价器,系统设计,51单片机,计价模式

Abstract:The meter is an important tool in modern taxi industry to ensure fast and accurate transactions between drivers and passengers. Without a meter, it would be hard to move resources between the two. This article around 51 single chip microcomputer on the meter design. SCM simple structure, easy to use, high reliability, can be achieved through software programming function conversion to avoid the complex instability of mechanical switches, compared with other digital analog circuit complex structure, debugging difficulties, high failure rate, the advantages of the SCM system is obvious. This design USES the motor to simulate the engine, with AT89S52 MCU as the center using DS1302 clock chip accurate timing,A3144 hall sensor ranging,LCD1602 LCD display, AT24C02 power off storage Settings data, respectively constitute the system"s minimum system module timing module of the MCU program module display module and storage module. In this design, two pricing modes are realized, one is based on mileage and time, that is, when the motor speed is very slow, it will automatically jump to pricing based on ride time, and it can also be classified into day and night pricing

Keywords:Meter, system design, 51 single - chip microcomputer, pricing mode

目 录

1 前言 3

1.1 发展背景 3

1.2 发展过程 3

1.3 研究意义 3

2 方案设计 4

2.1 设计任务 4

2.2 设计要求 4

2.3 方案拟定 4

2.4 方案选择 5

3 硬件设计概况 5

3.1 单片机的最小系统电路设计 6

3.2 时钟电路设计 10

3.3 显示电路设计 11

3.4 测速传感模块电路设计 13

3.5 电机模块电路设计 15

3.6 数据存储电路设计 15

3.7 按键模块电路设计 16

4 软件设计概况 18

4.1 软件介绍 18

4.2 程序设计 18

5 实物介绍 23

5.1 实物图 23

5.2 计价器等待界面 24

5.3 计价器计程计价界面 25

结论 26

参考文献 27

致谢 28

1 前言

1.1 发展背景

自改革开放,我国的交通基础设施建设就在高速的发展着,所有运输方式的流量都突破历史新高。十八大结束至今,我国的公路总里程增加了53w公里,而其中高速公路就占4w公里,覆盖率高达96%,领先于世界各国。

不仅道路建设不断完善,而且交通工具的数量也与日俱增。尽管越来越多的家庭购买了私家车,公交车更加普及完善,可是这仍不足以动摇出租车的地位。出租车是一种社会准公用的交通工具。它是公民出行的重要组成部分,在给予乘客个性化的便捷交通服务的同时,为拥有特殊出行要求和具有一定消费能力群体服务,从而获得盈利。

1.2 发展过程

第一代计价器:由于时代科技落后,初代计价器全是物理结构,由机械齿轮组成,只有简单的计程功能。

剩余内容已隐藏,请支付后下载全文,论文总字数:14523字

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图