登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 理工学类 > 电气工程及其自动化 > 正文

基于51单片机塑料大棚湿温度控制系统设计

 2022-11-05 10:11  

论文总字数:16428字

摘 要

在如今的人类社会发展中,农业生产是必不可缺的重要因素,而农业生产也随着计算机科技的发展有了新的发展。其中塑料大棚的温湿度控制系统是一项重要的研究内容。塑料大棚内适合种植蔬菜、花卉,储存粮食,甚至可以养殖动物。温度和湿度是影响植物日常生长的重要控制参数,温湿度控制可以应用于各种场景。早期的大棚温湿度控制是通过人工监测温湿度表、温度计、湿度表、湿度测试纸等测量温湿度的设备,然后对大棚进行加湿,除湿,增减温度。这种方式无法对温湿度达到快速精准的控制,浪费时间和精力,而且工作效率低。采用单片机来进行大棚温湿度的控制,可以全天监测温湿度并对温湿度的把控精准,做到时时监测并时时调节。本文将介绍一种通过利用51单片机和温湿度传感器等电子元件达到对温湿度控制目的的一种系统,由继电器LED灯来模拟升降温加减湿度装置。

关键词:传感器;温湿度;单片机;智能控制

Design of plastic greenhouse wet temperature control system based on 51 single chip microcomputer

Abstract

In today's development of human society, agricultural production is an indispensable important factor. And agricultural production also has a new development with the development of computer science and technology. The temperature and humidity control system in plastic greenhouse is an important research content. Temperature and humidity are important control parameters that affect the daily growth of plants. Temperature and humidity control can be applied to various scenes. Plastic shed can be used for planting vegetables, flowers, storing grain, and even raising animals. The early greenhouse temperature and humidity control is through the manual monitoring of temperature and humidity meter, thermometer, humidity meter, humidity test paper and other equipment to measure temperature and humidity, and then humidify, dehumidify, increase or decrease the temperature of the greenhouse. This way can not achieve rapid and accurate control of temperature and humidity, waste time and energy, and low efficiency. Now we can use single chip microcomputer to control the temperature and humidity of greenhouse. The characteristic of greenhouse controlled by single chip microcomputer is that it can monitor the temperature and humidity all day and control the temperature and humidity accurately. It can monitor and adjust the temperature and humidity from time to time. This paper will introduce a system which can control temperature and humidity by using 51 single chip microcomputer and temperature and humidity sensor.

Keywords: Sensor, Temperature and Humidity,MCU, Intelligent Control

目 录

摘 要 I

Abstract II

第一章 绪论 1

1.1 课题研究背景与意义 1

1.2 国内外研究状况和进展 1

1.3 课题研究的方案 1

第二章 塑料大棚温湿度控制器的设计方案 2

2.1大棚温湿度的主要内容与功能 2

2.2大棚控制系统的总设计 2

第三章 大棚温湿度控制器的硬件设计 3

3.1 STC89C51的概述 3

3.1.1 51单片机的特点 3

3.1.2 51单片机引脚介绍 3

3.1.2单片机最小系统 4

3.2控制系统硬件组成 4

3.2.1DHT11传感器 5

3.2.2液晶显示屏简介 7

3.2.3液晶显示模块电路原理图 7

3.2.4阀值设定模块 8

3.2.5继电器模块 9

第四章 控制系统的软件设计 11

4.1 控制系统软件的编程思路 12

4.1.1液晶显示模块设计 12

4.1.2传感器模块设计 13

4.2大棚温湿度控制系统的程序分析 13

4.2.1 关于LCD1602显示器的模块 15

4.2.2 关于温湿度传感器的模块 15

4.3软件所遇问题及解决方法 16

4.4调试分析 17

第五章 结论与展望 19

致 谢 20

参考文献 21

第一章 绪论

1.1 课题研究背景与意义

人类的生活需要舒适的温度和湿度,与此同时,温湿度也是人类生活必要物资的生产过程中尤为重要的因素。在一些重要工业农业生产领域对温湿度需要控制在一定范伟内,随着科技发展,与社会的进步,人类生活的水平也要迈向新的篇章。农业生产是人类社会维持下去的根基,在地球上的大气中的温度和湿度对农产品的产量和品质息息相关,因此温湿度的监测和控制在农业生产中非常重要。

STC89C51单片机适用于作为温湿度控制系统的核心硬件,在科技工业领域有着不可替代的地位,特点有节约成本,节约电能,效率高等。其中在温湿度控制领域更是应用广泛。所以STC89C51单片机用来作为大棚温湿度的控制芯片是非常合适的,而且比起430芯片,51单片机更容易来学会和调试。

1.2 国内外研究状况和进展

在21世纪初,世界各国对温湿度传感系统的研发方向是将功能更集中化,系统在各种情况下能智能判断该如何做出应对方法。目前温湿度传感系统测量以被相关科研人员研究出多种方案。

剩余内容已隐藏,请支付后下载全文,论文总字数:16428字

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图