登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 矿业类 > 消防工程 > 正文

某宾馆消防给水设计毕业论文

 2022-01-06 08:01  

论文总字数:26945字

摘 要

本设计是某高层宾馆的消防水系统设计,其中包括消火栓系统与喷淋系统的双系统的设计内容。

消火栓系统设计主要是依据相关规范,先确定消火栓型号、水枪流量和室内消防用水量等参数后再用autoCAD软件进行管网的布置,之后进行平面图和系统图绘制,最后对最不利管路进行水力计算,确定水泵的流量、扬程等具体数值,再进行相关消防设备的选型。

自动喷水灭火系统主要是根据规范确定建筑的危险等级进行喷头和管路的布置,之后采用作用面积法并通过部分试算进行包括最不利点喷头在内的水力计算,确定了面积内总流量和水泵扬程后,进行相关消防水泵的选型,并通过计算安装合适的减压孔板以及设计消防水箱和消防水池。

关键词: 消火栓系统 自动喷水灭火系统 水力计算 autoCAD

Fire water supply design for a hotel

Abstract

This design is the design of the fire water system of a high-rise hotel, which includes the design content of the dual system of hydrant system and sprinkler system.

The design of the hydrant system is mainly based on the relevant specifications, first determining the parameters of the hydrant model, the flow rate of the water gun and the amount of water used for indoor firefighting, then using autoCAD to arrange the pipe network, then drawing the plan and system diagrams, and finally performing the hydraulic calculation on the most unfavorable pipeline , Determine the specific values of the pump flow, head, etc., and then select the relevant fire equipment.

The automatic sprinkler system mainly arranges the nozzles and pipelines according to the specification to determine the danger level of the building, and then uses the active area method and performs hydraulic calculations including the most unfavorable point nozzles through partial trial calculations to determine the total flow rate in the area After the pump head is lifted, the relevant fire pumps are selected, and the appropriate decompression orifice plate is calculated and the fire tank and fire pool are designed by calculation.

Keywords : hydrant system; sprinkler system; hydraulic calculation; autoCAD

目 录

摘 要 I

Abstract II

第一章 绪论 1

1.1 设计背景 1

1.1.1 高层火灾事故案例 1

1.2 国内外研究综述 2

1.2.1 高层建筑火灾特点及存在问题 2

1.2.2 国外研究综述 3

第二章 设计说明 5

2.1 工程概况 5

2.2 设计任务 5

2.2.1 消火栓系统设计 5

2.2.2 喷淋系统设计 5

2.2.3 绘制设计图 5

第三章 消火栓系统设计 6

3.1 设计流程 6

3.2 设计过程 6

3.2.1 自动给水设备 6

3.2.2 管网布置 6

3.2.3 选定消火栓、水带、水枪的型号 7

3.2.4 消火栓的水枪设计流量和设计喷嘴压力 7

3.2.5 计算水枪的出口压力 7

3.2.6 每支水枪的设计流量,每支水枪流量的计算 7

3.2.7 室内消火栓设计流量 8

3.2.8 室内消火栓的保护半径 8

3.2.9 最不利管路选择 9

3.2.10 最不利点消火栓栓口处所需的水压 9

3.2.11 消防给水管网的管径 9

3.2.12 最不利管路的水头损失 10

3.2.13 消防设备设施选型 10

第四章 自动喷水灭火系统设计 13

4.1 设计流程 13

4.2 设计基本参数与选型 13

4.2.1 设计基本参数 13

4.2.2 喷头的选型 14

4.2.3 管线的布置要求 14

4.2.4 报警阀的选用及布置要求 14

4.2.5 水流指示器、末端试水装置型号及布置要求 15

4.3 设计过程 16

4.3.1 绘制管网图 16

4.3.2 绘制系统图 16

4.3.3 水力计算介绍 16

4.3.4 计算步骤: 18

4.3.5 水力计算过程 19

4.3.6 喷淋校核 36

4.3.1 稳压相关计算 37

4.3.2 水泵扬程及选型 39

4.3.3 其他消防设施选型 39

4.3.4 减压孔板计算 40

设计总结 42

参考文献 43

致谢 46

绪论

设计背景

面对时代的发展,为了适应当前环境,合理利用土地资源。目前城市中有许多高层建筑。为了保证高层建筑的安全,有必要在消防装置的设计中做好工作。消防设备与建筑物的安全直接相关。由于高层建筑本身很高,因此在发生火灾时很难扑灭。 在该建筑物具有有效的消防设备时,将大大减少对人们生命财产的威胁[1]

高层火灾事故案例

2010年11月15日14时,位于上海余姚路胶州路的28层教师公寓大楼,起火点的位置在10-12层之间,事情起因时由于无证电焊工违章的操作起火,导致58人遇难[2]

2011年2月3日零时13分(大年初一),位于沈阳市的皇朝万鑫宾馆37层B座楼十一层1109房间南侧的室外平台,因为燃放烟花爆竹引燃楼表面的装饰材料发生火灾,导致直接经济损失达9384万元[2]

请支付后下载全文,论文总字数:26945字

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图