登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 矿业类 > 安全工程 > 正文

聚二甲基硅烷工艺热安全评估研究毕业论文

 2022-01-30 09:01  

论文总字数:18412字

摘 要

聚二甲基硅氧烷是一种有机硅材料。它独特的结构和卓越的性能普遍的被应用在人们的生活之中,汽车、建筑、航空航天尤其常见,因此我们对其性能进行研究,该文主要对PDMS的热危险性进行研究与评估。

该化工工艺过程中的反应物质为二氯二甲基硅烷和金属钠。聚二甲基硅氧烷工艺的热风险测试内容包括以下三点:

  1. 采用对差示扫描量热仪DSC聚合反应工艺的反应物二氯二甲基烷的热危险性进行探究;
  2. 采用自动反应量热仪RC1e去测定目标反应过程中的反应热特性;
  3. 采用绝热量热仪VSP2测定聚二甲基硅氧烷反应产物的物料分解反应特性;

对本次检测的聚二甲基硅氧烷合成反应的反应危险度依据国家安监总局发布的《精细化工反应安全风险评估导则(试行)》来分析。

通过对PDMS的Tp 、MTSR、TD24 、MTT四个温度参数进行比较,确定其工艺危险等级,再确定其危险性。

关键词:PDMS、差示扫描量热仪、反应量热仪、绝热量热仪、温度参数、工艺危险等级、危险性。

Study on thermal safety assessment of POLYMETHYLSILANE process

ABSTRACT

PDMS as a silicone material, due to its special structure and excellent performance have been extensively studied and applied in automobile, construction, aerospace, electrical and electronics, and so on, so we need to study its performance. This article focuses on research and evaluation of thermal risks.

The reaction material in this chemical process is dichlorodimethylsilane and metallic sodium. The heat risk test and analysis content of this process mainly includes:
(1) The differential scanning calorimeter DSC is used to test the thermal hazard of the reactant dichlorodimethylalkane;
(2) using automatic reaction calorimeter RC1e to measure the reaction heat characteristics during the target reaction;
(3) The material decomposition reaction characteristic of the reaction product was measured by using a thermite calorimeter VSP2;

The reaction risk of the PDMS synthesis reaction detected this time is based on the “Guidelines for Safety Risk Assessment of Fine Chemical Reactions ” issued by the State Administration of Work Safety No. for analysis.

Through the reaction temperature of the PDMS process Tp , the MTSR, TD24 , MTT Four temperature parameters are compared to determine the process hazard level and then determine the hazard.

Keywords: PDMS, differential scanning calorimeter, reaction calorimeter, adiabatic calorimeter, temperature parameter, process hazard level, hazard.

目录

摘 要 2

ABSTRACT 3

第一章绪论 1

1.1化工行业和化工工艺热危险性研究的意义 1

1.1.1我国化工行业安全生产现状: 1

1.1.2我国化工行业存在主要问题: 1

1.1.3化工工艺热危险性研究的意义: 2

1.2国内外研究概况: 3

1.2.1有机硅和聚二甲基硅烷研究概况 3

1.2.2聚二甲基硅烷工艺的危险性: 4

1.3本文研究内容: 5

1.4本文研究要求: 5

第二章工艺介绍、物质介绍及物质危险性 6

2.1 PDMS工艺流程介绍 6

2.1.1聚二甲基硅烷生产工艺流程 6

2.2聚二甲基硅氧烷 7

2.2.1 PDMS物质介绍 7

2.2.2 PDMS有关应用的介绍 7

第三章 实验和风险评估的方法介绍 9

3.1实验部分 9

3.1.1差示扫描量热仪(DSC) 9

3.1.2 反应量热实验 9

3.1.3绝热反应测试 11

3.2风险评估的方法 12

3.2.1失控情景分析法 12

3.2.2风险矩阵评估法 13

3.2.3两种风险评估方法的比较 15

第四章 实验结果和风险评估的结论 17

4.1 反应物料DSC筛查测试实验结果 17

4.2 反应量热实验实验结果 17

4.3 绝热反应测试实验结果 19

4.3.1 RC1e反应后的混合产物测试 19

4.3.2乙醇洗净后的产物测试实验结果 20

4.4 工艺的热危险性评估 20

4.4.1风险矩阵 21

4.4.2 失控情景分析 22

第五章 总结与展望 23

5.1总结 23

5.2展望 23

参考文献 25

第一章绪论

1.1化工行业和化工工艺热危险性研究的意义

1.1.1我国化工行业安全生产现状:

(1)化学品在我国的生产、加工、使用、销售中得到了广泛的应用:石油和化工企业多达30000家,总产值位居世界第一,合成氨、化学肥料、硫酸、农药、烧碱等化工产品产量以及以乙烯为龙头的主要化工产品消费量居世界首位,原油加工能力也遥遥领先排名世界第二。

(2)石油化工行业占据了我国国民经济主要部分:主营业务收入和利润总额超过全国规模以上工业主营收入和利润总额的12%以上。全国有二十余万家危险化学品生产经营单位,生产企业大约1.9万家。

请支付后下载全文,论文总字数:18412字

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图