共混改性用增溶剂的合成制备及对聚碳酸酯共混物结构与性能的影响毕业论文
2021-06-30 08:06
摘 要
高分子材料的使用越来越广,单一的高分子材料是难以满足不同的使用需求,因此材料改性越来越重要。对于材料改性而言,不同的聚合物的共混物及其应用是研究的重要内容之一。由于多数聚合物体系之间的相容性不好,导致共混物综合性能较差,因此需要加入增容剂以改善聚合物共混物的相容性。
PC和PS的共混物存在相容性的问题,论文以悬浮聚合方法合成了苯乙烯-马来酸酐交替共聚物(SMA)、3种不同单体比的苯乙烯-甲基丙烯酸甲酯无规共聚物(MS),并选择商品乙烯-醋酸乙烯共聚物EVA作为PC和PS的共混物的增溶剂,通过共溶剂法共混的方法制备了PC/PS共混物薄膜。观察了所得共混物薄膜的透明性,用DSC、DMA方法表征共混物的玻璃化转变温度并以此来研究增溶剂对共混物的相容性的影响。
实验结果表明:单纯的PC和PS共混体系为部分相容体系,加入增容剂增加了PC/PS共混物体系的相容性,对共混物体系中PS相的玻璃化温度由107 ℃增加到120 ℃左右,而PC相的玻璃化温度在150 ℃左右,与纯PC差别不大。我们可以假设即使能使PC/PS共混体系完全相容,也不会使PC/PS的共混物的耐热性太差,因为其中PC相的耐热性起到关键性的作用。加入MS3增容剂薄膜透明性最佳,可以反映其增容效果最佳,而MS1(MMA:St=6:8)、MS2(MMA:St=15:10)、MS3(MMA:St=10:5)的增容效果为:MS3gt;MS2gt;MS1,说明MMA的比例越大,其对PC/PS共混物的增容性更好。
关键词:溶剂共混;PC/PS共混物;相容性;增容剂
Abstract
The use of polymer materials more widely, a single polymer material is difficult to meet the different needs, so the material modification increasingly important. For material modification, the different polymer blends and its application is an important part of the study. Most polymer system because of compatibility between poor, resulting in poor overall performance of the blend, and therefore need to add a compatibilizer to improve the compatibility of the polymer blend.
The existence of compatibility issues PC and PS blend. Paper synthesized by suspension polymerization process of styrene - maleic anhydride alternating copolymer (SMA), Three different monomer ratios styrene - methyl methacrylate random copolymer (MS), and select merchandise ethylene - vinyl acetate copolymer EVA as PC and PS blend solubilizer. PC / PS blend films by blending of the co-solvent were prepared. Observe the transparency of the resulting blend film. By DSC,DMA method to characterize the glass transition temperature of the blend and thus to study the effect of solubilizing the compatibility of blends.
The results showed that: a simple PC and PS blends of partially compatible system, adding compatibilizer increases compatibility of PC / PS blend system. The glass transition temperature of the blend system PS phase increased from 107 ℃ about 120 ℃, while the glass transition temperature of the PC phase at about 150 ℃, pure PC little difference. Even if we can assume that enables PC / PS blends fully compatible, nor will the PC / PS blend of poor heat resistance, because the heat resistance of the phase in which the PC play a key role. Add MS3 optimal compatibilizer transparency of the film, which can reflect the best compatibilizer, and MS1 (MMA: St = 6: 8), MS2 (MMA: St = 15: 10), MS3 (MMA: St = 10 : 5) as a compatibilizing effect: MS3gt; MS2gt; MS1, explained MMA greater proportion, their PC / PS blend compatibilization better.
Keywords: solvent blend; PC / PS blend; compatibility; compatibilizer
目 录
第1章 绪论 1
1.1研究背景 1
1.2 聚碳酸酯(PC)简介 1
1.2.1 概述 1
1.2.2 性能 2
1.2.3 应用 3
1.2.3 PC树脂改性 4
1.3 增容剂简介 5
1.4 PC国内外研究现状 6
1.5 研究PC合金的目的及意义 8
1.6 研究内容及预期目标 9
第2章 实验部分 11
2.1 实验原料 11
2.2 实验仪器及设备 11
2.3苯乙烯马来酸酐交替共聚物合成 12
2.4苯乙烯甲基丙烯酸甲酯无规共聚物合成 12
2.5 PC/PS共混合金制备 12
2.6 表征及性能测试 14
2.6.1 红外 14
2.6.2差示扫描量热(DSC)分析 14
2.6.3动态粘弹(DMA)分析 14
2.6.4透明性 14
第3章 结果与讨论 15
3.1 实验条件对增容剂合成的影响 15
3.1.1分散剂对反应的影响 15
3.1.2搅拌速度对反应速度的影响 15
3.1.3单体和水比对反应的影响 16
3.2 红外 17
3.3 共混物相容性 19
3.4 共混物动态粘弹 20
3.5 透明性 21
第4章 结论 23
参考文献 24
致谢 27
- 绪论
- 研究背景
如今,高分子材料新品种的开发越来越困难,已经开发的品种虽然很多,但是能够工业化生产的只有三百多种;材料的使用性能越来越多样化、复杂化,那就要求使用的材料要同时具有多种功能和性能,单一的一种高分子材料是难以实现的。因此,聚合物改性势在必行,聚合物共混是高分子材料领域聚合物改性的一个重要分支。
通过机械方法和物理方法,在高分子材料中加入有机或无机物质。或者把不同类的高分子聚合物共混,也可以用化学方法来实现高聚物的共聚、交联、嵌段、接枝,也可以将以上方法联用,从而使材料的成本下降[1]。在保留原有高分子材料的优异性能的前提下,成型加工的性能或最终的使用性能得到改善,或者仅在表面或光、电、热、磁、声、燃烧等方面赋予材料独特功能等效果,统称为聚合物改性。聚合物改性有如下方法:纤维增强型复合材料;共混改性;化学改性;填充改性;表面改性。
您可能感兴趣的文章
- 一种醛类高灵敏度检测方法及其在葡萄干和奶粉的糠醛分析中的应用外文翻译资料
- 膦催化的联烯与甲基酮亚胺、烯胺、伯胺的[4 1]环加成反应外文翻译资料
- 醛氧氧化制备羧酸的制备微液滴外文翻译资料
- 镍基M[金属-有机]骨架对Ni/NiO/C电催化氢氧化的增强研究外文翻译资料
- 以过氧化二丁酯为自由基引发剂,原位增容聚乳酸和聚己二酸丁二酯对对苯二甲酸酯共混物外文翻译资料
- 新型三元Ag/CeVO4/g-CzN4纳米复合材料作为高效可见光驱动光催化剂外文翻译资料
- 钌(II)催化苯并咪酯和亚砜酰亚胺的无氧化偶联/环化形成取代异喹啉外文翻译资料
- α-氨基异丁酸促进的抗炎药和肽互偶氮前药的合成外文翻译资料
- 一种新型和方便的苯并腈合成方法:芳基和杂芳基溴化物的亲电氰化外文翻译资料
- 四串联C-H激活:顺序C-C和C-O键通过Pd催化 的交叉脱氢偶联(CDC)方法制备外文翻译资料