登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 化学化工与生命科学类 > 应用化学 > 正文

一种复配型阳离子快裂乳化剂的制备毕业论文

 2021-03-23 10:03  

摘 要

沥青是一种有机有机胶凝状物质,呈黑褐色,主要成分为不同分子量的碳氢化合物及其非金属衍生物,在高温下呈液态,具有高粘度,能够与沙石等建筑材料很好的粘结,广泛应用于道路铺设和修补中。乳化沥青是粘稠的沥青经过加热,在机械力的搅拌下形成微粒,分散在具有乳化剂-稳定剂的水中所形成的一种乳化液。乳化沥青在常温下流动性很好,具有适用范围广、节约能源、施工时间短、使用便捷等优点。

本文以2-羟基-3-十八烷基胺基-丙基三甲基氯化铵、椰油酰胺甜菜碱、十八烷基三甲基氯化铵作乳化剂,二乙烯三胺、三乙醇胺作快裂快凝剂,硫酸铝作稳定剂,制备复配型阳离子快裂快凝乳化剂,在优化工艺和配方的基础上得出如下结论:

1.复配型乳化剂A的最佳配方(质量比)为:2-羟基-3-十八烷基胺基-丙基三甲基氯化铵含量为45-55%,十八烷基三甲基氯化铵含量为35-45%,二乙烯三胺含量为3-4%,三乙醇胺含量为1-2%,硫酸铝含量为5%。

2.复配型乳化剂B的最佳配方(质量比)为:2-羟基-3-十八烷基胺基-丙基三甲基氯化铵含量为35-45%,椰油酰胺甜菜碱含量为25-35%,十八烷基三甲基氯化铵含量为15-25%,二乙烯三胺含量为3-4%,三乙醇胺含量为1-2%,硫酸铝含量为5%。

3.乳化剂水溶液的pH为3-4时效果最佳。

关键词:阳离子乳化剂 乳化沥青 复配型沥青乳化剂

Abstract

Asphalt is an organic organic gelatinous material, dark brown, the main component of different molecular weight hydrocarbons and non-metallic derivatives, in high temperature was liquid, with high viscosity, and sand and other building materials can be very good Of the bonding, widely used in road laying and repair. Emulsified asphalt is an emulsified solution of viscous asphalt which is heated by heating to form particles under mechanical agitation and disperse in water with an emulsifier-stabilizer. Emulsified asphalt flow at room temperature is very good, with a wide range of applications, saving energy, construction time is short, easy to use and so on.
In this paper, 2-hydroxy-3-octadecylamino-propyltrimethylammonium chloride, cocoamidobetaine, octadecyltrimethylammonium chloride as emulsifier, diethylenetriamine, tris Ethanol amine as fast crack fastener, aluminum sulfate as stabilizer, preparation of complex cationic fast crack quick-release emulsifier, in the optimization of the process and formula based on the following conclusions:
1. The optimum formulation (mass ratio) of the complex emulsifier A is: 2-hydroxy-3-octadecylamino-propyltrimethylammonium chloride content of 45-55%, octadecyl Trimethylammonium chloride content of 35-45%, diethylenetriamine content of 3-4%, triethanolamine content of 1-2%, aluminum sulfate content of 5%.
2. The best formula (mass ratio) of compound emulsifier B is: 2-hydroxy-3-octadecylamino-propyltrimethylammonium chloride content of 35-45%, cocoamide beet Alkali content of 25-35%, octadecyl trimethyl ammonium chloride content of 15-25%, diethylenetriamine content of 3-4%, triethanolamine content of 1-2%, aluminum sulfate content of 5 %.
3. The pH of the emulsifier aqueous solution is the best.

Keywords:Cationic emulsifier Emulsified asphalt Compound type asphalt emulsifier

目 录

第一章 前 言 1

1、1 沥青 1

1、2 乳化沥青 1

1、3沥青的乳化机理 2

1、3、1 降低表面张力 2

1、3、2 “界面膜”理论 2

1、3、3 双电层的稳定作用 3

1、4 沥青的破乳机理 3

1、4、1沥青的储存破乳 3

1、4、2沥青的分裂破乳 3

1 、5沥青乳化剂的研究现状 4

1、5、1 烷基胺类 4

1、5、2 酰胺类 4

1、5、3季铵盐 4

1、5、4 木质胺类 5

1、6沥青乳化剂的复配 5

1、7 研究背景和意义 5

第二章 复配型沥青乳化剂A的制备及性能测试 7

2、1 配方设计及原理 7

2、2 试剂及原料 7

2、3 复配型乳化剂A的制备 8

2、4 乳化性能和稳定性的测试 8

2、5 复配型乳化剂A的配方优化 9

2、5、1 C01和1831不同用量的影响 9

2、5、2 二乙烯三胺和三乙醇胺不同用量的影响 9

2、6 本章小结 11

第三章 复配型沥青乳化剂B的制备及性能测试 12

3、1 配方设计及原理 12

3、2 试剂及原料 12

3、3 复配型沥青乳化剂B的配置和性能检测 12

3、4 复配型乳化剂B的配方优化 12

3、4、1 椰油酰胺甜菜碱不同含量的影响 12

3、4、2 C01不同含量的影响 13

3、4、3 各组分不同含量的影响 15

3、4、4 pH值对乳化性能的影响 16

3、4、5 乳化剂的可拌合时间及其影响因素 16

3、5 本章小结 16

第四章 结论 18

参考文献 19

致 谢 21

第一章 前 言

1、1 沥青

沥青是一种有机有机胶凝状物质,呈黑褐色,主要成分为不同分子量的碳氢化合物及其非金属衍生物,在高温下呈液态表面为黑色。溶于二硫化碳,几乎不溶于水,可作很好的防水防潮材料。具有高粘度,能够与沙石等建筑材料很好的粘结,广泛应用于道路铺设和修补中 [1]。由于来源广泛,各种特性优良,沥青成为涂料,塑料,橡胶,建筑和道路交通等行业不可缺少的基建材料。

沥青一般储存在大型储罐中,使用时罐体可以在罐中加热,提高沥青的流动性,从而平稳快速地输出,这中经加热使用的沥青称为热沥青。加热输出所需的热源通常是传热油,但是这种加热方法具有以下缺点:加热过程不经济,当只需要少量沥青时,需要把整个油罐的沥青全部加热,加热所用的量是使用数量的几倍,使得大量的热油做无用功;加热时沥青的温度不均衡,加热器附近的沥青温度较高,远处的温度较低,严重影响沥青的质量;反复在油罐沥青加热,加热过程中会产生大量的小分解产物,对沥青的颜色也有一定的影响,增加后期处理成本。此外,施工中沥青的加热将会生成大量致癌物质苯并芘,污染环境,危及建筑工人的健康[2]

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图