登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 交通运输类 > 道路桥梁与渡河工程 > 正文

二连浩特至河口公路山西段(K55 000~K60 000)施工图设计毕业论文

 2021-03-26 10:03  

摘 要

本次毕业设计道路为二连浩特至河口公路山西段新建公路。根据设计道路的交通量及其使用目的,确定为二级公路。道路设计范围自桩号至,路线长度,道路设为双向两车道,路面宽度,设计时速为。

设计任务包括路线的平面设计、纵断面设计、横断面设计、挡土墙以及边坡防护设计、路基排水设计、桥涵构造物设计、路面结构设计以及方案比选工作。其中平面设计包括工作平面线形的选线和平曲线线形设计,纵断面设计工作包括纵断面坡度、坡长的设计和竖曲线设计及高程计算,横断面设计包括路基设计和土方调配等。

本次设计的平面设计、纵断面设计、横断面设计均完成了两个方案,并通过两个方案的各项技术指标进行方案比选;边坡防护设计也设计了两种形式,分别为植草防护和浆砌片石方格网植草护坡,以满足路段边坡的稳定防护需求;桥梁设计仅给出了桥型、桥长和跨径等尺寸,涵洞设计了三种结构形式,分别为盖板涵、圆管涵和箱涵以满足道路横向排水和通车的需求;路面结构设计了两种,分别为沥青混凝土路面和水泥混凝土路面以便得到最优路面结构方案。

本次设计详细地计算了平曲线的各项要素和主点桩号、百米桩号的绝对坐标,竖曲线的各项要素,挡土墙的各项验算指标,沥青和水泥路面结构的各项指标。

设计图表有路线总体布置图、路线平面图、路线纵断面图、道路用地图、直线、曲线及转角表、路线逐桩坐标表、路基标准横断面图、路基一般设计图、路基横断面设计图、路基加固(支挡)及防护工程设计图、路面结构图、路基排水系统布置图、路基设计表、路基土石方数量表、涵洞设计图。

关键词:二级公路;路线设计;挡土墙;路基排水;路面结构

Abstract

The subject of this graduation design is a newly-built road from Erlianhaote to Hekou in the Shanxi province. According to the given traffic volume,the road is defined as a secondary road. The road design range from saction K55 000 to K60 000, the total length is 5000m, two-lane two-way, and design speed is 60km/h.

Design tasks include the graphic design of the route-section, longitudinal-section design, cross-section design, retaining wall and slope protection design, roadbed drainage design, bridge and culvert structural design, pavement structure design and program selection work.The cross-sectional design includes longitudinal section slope, slope length design and vertical curve design and elevation calculation. The cross-sectional design includes roadbed design and earthwork moving, and so on.

The design of the graphic design, profile design, cross-sectional design are completed two programs, and through the two programs of the technical indicators for program selection; slope protection design is also designed in two forms, respectively, for the grass The bridge design is only given the bridge type, bridge length and span size, culvert design of the three structural forms, respectively, for the cover plate culverts, pipe culverts and box culverts to meet the needs of road horizontal drainage and traffic; pavement design of the two, respectively, asphalt concrete pavement and cement concrete pavement in order to get the best road structure program.

This design details the calculation of the flat curve of the elements and the absolute coordinates of main station points , 100-meter poins, the vertical curve of the elements, the retaining wall of the inspection indicators, asphalt and cement pavement structure of the indicators.

The design charts include the general layout of the route, the route plan, the route profile, the road map, the straight line, the curve and the angle table, the road pile table, the subgrade standard cross section, the general design of the roadbed, the design of the cross-section roadbed, the design of reinforcement (support) and protection engineering, pavement structure, roadbed drainage system layout, roadbed design table, roadbed earth scale table, culvert design.

Key words: secondary road; route design; retaining wall; roadbed drainage; pavement structure

目录

第1章 绪论 1

1.1中国公路发展概况 1

1.2选题的意义 1

1.3项目概况 1

1.3.1地形地貌 1

1.3.2地质 1

1.3.3地震 2

1.3.4气候 2

1.3.5水文 2

1.3.6沿线筑路材料的情况 2

第2章 路线设计 3

2.1道路类型及等级论证 3

2.2道路技术标准论证 5

2.2.1计算行车速度 5

2.2.2平面线形标准 5

2.2.3竖曲线要素标准 6

2.2.4车辆荷载标准 6

2.3平面线形设计 6

2.3.1道路选线 6

2.3.2计算举例 8

2.4纵断面设计 13

2.4.1纵断面设计 13

2.4.2竖曲线设计 14

2.4.3计算举例 14

2.5线形组合设计 17

2.5.1组合设计的原则 17

2.5.2线形组合设计要点 17

第3章 路基、路面及排水设计 18

3.1路基设计 18

3.1.1路基宽度 18

3.1.2路基高度 19

3.1.3路基坡度 19

3.1.4路拱坡度 19

3.1.5路基弯道超高,加宽 20

3.1.6确定沿线路基取土、弃土位置 23

3.1.7计算土石方数量并进行调配 24

3.1.8路线方案比选 24

3.1.9挡土墙设计 26

3.1.10防护工程设计 31

3.2路面设计 32

3.2.1设计资料 32

3.2.2沥青混凝土路面 33

3.2.3水泥混凝土路面 41

3.2.4方案比选 47

3.3排水设计 47

3.3.1设计原则 48

3.3.2排水设施的构造与布置 48

第4章 桥涵、交叉设计 50

4.1桥梁设计 50

4.1.1桥址的选择 50

4.1.2桥型、桥长的设计 50

4.2涵洞设计 50

4.2.1涵洞的形式 50

4.2.2涵洞的设计与布置 50

4.3立交设计 51

第5章 结论 52

参考文献 53

致谢 54

第1章 绪论

1.1中国公路发展概况

,进入新世纪以来,我国各级公路的建设取得了飞跃式的发。,现阶段的公路要求在已有的规范标准上,适当吸取国,综合考虑各项因素进行公路的设计与建设工作。

1.2选题的意义

二连浩特至河口公路山西段是山西省规划的“中纵主干线”的重要组成部分。该公路的建设是中央关于加快中西部地区经济发展,公路主干线的需要,,它的建成有利于加快晋南,是山西省联系我国西北、。

、、路线平、纵、横断面和路基结构、排水、。这些设计任务要求我们运用之前所学的知识和各种文献及软件工具,,为学生将来成为“宽。

1.3项目概况

1.3.1地形地貌

本路段位于山西省西南部,级阶地、黄河级阶地、,属于。,路线沿黄河东岸Ⅰ,,伏不大,地面标高在之间,,呈风,地形变化复杂,但高差不大,。路线终点,村一带,,,地面标高约。

,黄河河床宽约,,高在之间,,,一般水面宽,深可达3m。

1.3.2地质

本次建设设计区域范围较大,,拟新建的公路位于地质凹陷的中西部区域,且路线顺凹陷展布。

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图