登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 土木建筑类 > 建筑环境与能源应用工程 > 正文

南京某医院一期A楼中央空调系统设计毕业论文

 2020-06-19 10:06  

摘 要

本工程为某新城医疗中心项目为一栋大型医疗中心建筑。工程分两期建设,一期建设包括主楼A及裙房,主楼B及裙房,一期地下车库。二期建设包括主楼C及裙房,主楼D及裙房,主楼E及裙房,二期地下车库,高压氧仓。主楼A建筑面积为53687.93m2,共10层,建筑高度为43.200m。主楼B楼建筑面积为57110.27 m2,共11层,建筑高度为47.100m,主要功能为门诊、病房、医技及其配套设施。一期地下车库建筑55576.15m2,地下共1层,主要功能停车库,自行车库,设备用房等,详细细致的建筑平面布置参考建筑图纸。

本次设计为A楼中央空调系统及一期冷热源设计,空调系统应达到各种不同类型的房间的设计要求,通风系统应满足大厅和各功能间良好的空气环境。通风系统应满足大厅和各功能间良好的空气环境。本工程建筑面积23955.95m2,空调系统面积为17993.78 ,夏季冷负荷共为11200kW(含B楼冷负荷)。本设计采用两台螺杆式机组和三台离心式冷水机组制冷供给夏季使用,冬季采用一台换热器与锅炉房所提供的热水进行热交换以供热。

通过不同的空调方案比较,本设计四层大空间房间采用独立的全空气系统,而类似于办公室、病房等适合独立控制和管理的房间,采用风机盘管加新风系统,便于独立控制。冷冻水由地下室的冷冻机房供应,采用了闭式同程两管制水系统,设计工程中考虑了消声、减振和防火的措施。

关键词:全空气系统 风机盘管加新风系统 同程式水系统 冷水机组

Abstract

The project for a new city medical center project is a large medical center building. Construction project in two phases, a construction includes building a and annex. B the main building and podium, an underground garage. Construction of the second phase comprises a main building C and podium, building D and podium, building E and podium, phase II of the underground garage, the hyper oxygen chamber. Building a construction area of 53687.93m2. A total of 10 layers, building height for M2 57110.27 43.200m. building B building area, a total of 11 layers, the height of the building is 47.100m and main function of clinic, ward, medical technology and facilities. A underground car Library building 55576.15m2, a total of 1 underground, the main features of the garage, the garage, equipment, etc, detailed construction plan layout reference construction drawings.

The design for central air conditioning system of a building and a period of cold and heat source design, the air conditioning system should meet the design requirements of a variety of different types of room, the ventilation system should meet the hall and the function between good air environment. Ventilation system should meet the hall and the function between good air environment. The construction area 23955.95m2, area of air conditioning systems for 17993.78 and cooling load in summer for a total of 12000kW (including B building cooling load). This design uses two screw type units and three sets of centrifugal chiller supply summer use in winter the use of a transfer heater and boiler room provides hot water heat Exchange for heating.

Through the different air conditioning scheme compared the design of four layer big space room by independent of all air system, similar to the office, ward for independent control and management room, adopt fan coil unit plus fresh air system for independent control. Chilled water from the basement of the cold cold supply room, by a closed with two water control system, engineering design muffler considered, vibration and fire measures.

Key words: total air system fan coil unit and fresh air system reversed return system cold water unit

第1章 工程概况 5

1.1 工程名称 5

1.2建筑概况 5

1.3 气象参数 5

1.4建筑资料 5

1.5 房间类型 6

1.6 室内设计参数 6

第2章 空调负荷的计算 8

2.1 冷负荷计算 8

2.1.1 通过外墙和屋顶形成的逐时冷负 8

2.1.2外窗瞬变传热形成的冷负荷 8

2.1.3透过玻璃窗的日射得热引起的冷负荷 8

2.1.4内围护结构传热形成的冷负荷 9

2.1.5 室内热源散热量 9

2.2 热负荷的计算 15

第3章 空调系统方案的选择 16

3.1分区 16

3.1.1 内区和外区 16

3.1.2 房间功能 16

3.1.3 负荷特性 16

3.1.4 空调分区 16

3.2空调系统方案确定 17

3.2.1空调系统的分类 17

3.2.2 各种空调系统适用条件和使用特点 18

3.3.2风机盘管加新风系统的选择 20

3.3.3空调系统的选定 20

第4章 送风量计算及设备选型 21

4.1 房间送风量及冷量确定 21

4.1.1. 全空气一次回风系统送风量冷量及新风冷负荷 21

4.1.2 风机盘管加新风系统送风量冷量及新风冷负荷 22

4.2 空调设备的选择 23

4.2.1 风机盘管机组选择 23

4.2.2 新风机组选择 24

第5章 气流组织计算 25

5.1 风口布置形式与与选型 25

5.2 气流组织的送风方式 25

5.3 气流组织的设计计算 26

5.3.1 散流器送风气流组织校核计算 26

5.3.2.双层百叶侧送 27

第6章 空调风管水力计算 29

6.1 风系统的水力计算方法 29

6.2 风系统的水力计算举例 29

第7章 空调水系统的设计计 33

7.1 空调水系统划分原则 33

7.2 空调水系统的形式 33

7.3 空调水系统设计原则 34

7.4 空调水系统方案的确定 34

7.5 水力计算的步骤 34

7.6 水力计算过程 34

7.6.1 流量计算 34

7.6.2 管径的确定 34

7.6.3 沿程阻力计算 35

7.6.4 局部阻力计算 35

7.6.5 系统总阻力计算 35

7.7 水力计算举例 36

7.8空调冷凝水系统设计 38

第8章 主要设备选型 39

8.1冷热源选择的原则 39

8.2 冷热源机组的选择 39

8.3制冷机组选型 40

8.3 水泵的选型和计算 41

8.3.1 冷水机组循环泵选型和计算 41

8.3.2 冷却水泵的选型和计算 42

8.3.3水泵配管布置 43

8.4补水定压装置 43

8.4.1补水定压的方式和特点 43

8.4.2变频补水泵的选择 43

8.5水处理装置 44

8.6冷却塔的选型与计算 44

8.7 分水器和集水器的选择 45

8.7.1分水器和集水器的构造和用途 45

8.7.2分集水器的选型 45

8.8板式换热器的选型 47

9 管路系统的保温防腐及消声隔振 49

9.1 管路系统的保温 49

9.1.1 保温的目的 49

9.1.2 保温的结构 49

9.1.3 保温层的厚度 49

9.2 管道的防腐 50

9.3 管路系统的消声 50

9.4空调系统的隔振 51

第10章 卫生间和车库的通风设计 52

9.1.1卫生间排风量的确定 52

10.2排风扇的选择 52

第11章 防火排烟设计 55

11.1、设计原则 55

11.2防火排烟设计 56

参考文献 58

第1章 工程概况

窗体底端

1.1 工程名称

南京某医院一期工程空调系统设计

1.2建筑概况

本工程为某新城医疗中心项目为一栋大型医疗中心建筑。工程分两期建设,一期建设包括主楼A及裙房,主楼B及裙房,一期地下车库。二期建设包括主楼C及裙房,主楼D及裙房,主楼E及裙房,二期地下车库,高压氧仓。本次设计为A楼中央空调系统及一期冷热源设计。主楼A建筑面积为53687.93m2,共10层,建筑高度为43.200m。主楼B楼建筑面积为57110.27 m2,共11层,建筑高度为47.100m,主要功能为门诊、病房、医技及其配套设施。一期地下车库建筑55576.15m2,地下共1层,主要功能停车库,自行车库,设备用房等。

1.3 气象参数

表1-1南京室外设计参数表

省份

城市名称

台站位置

统计年 份

年平均温度(℃)

大气压力(kPa)

北纬

东经

海拔(m)

冬季

夏季

江苏

南京

32°00′

118°48′

8.9

1971-2000

15.5

1025.0

1004.3

室外计算温、湿度(℃)

室外平均风速
m/s

夏季

空气调节室外计算干球温度(℃)

空气调节室外计算湿球温度(℃)

室外通风计算温度(℃)

通风计算相对湿度(%)

空气调节室外计算日平均温度(℃)

夏季

冬季

34.8

28.1

31.2

69

31.8

2.6

2.4

1.4建筑资料

1.41. 建筑体型系数:0.14。

1.42. 围护结构的类型及热工性能指标

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图