登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 理工学类 > 油气储运工程 > 正文

L-CNG加气站设计毕业论文

 2021-11-05 07:11  

摘 要

本设计以黄石为设计地点,借助参考文献、网络资料以及生活中实际考察设计出本文中L-CNG加气站的工艺流程,根据假定情况设定参数介绍、计算,同时为本此黄石气站设计选择的主要设备,主要设备包括LNG储罐、加液机、潜液泵、高压气化器、高压柱塞泵、卸车增压器、EAG加热器、 CNG储气瓶、加气机和顺序控制盘等等[1]。根据流程并结合设计出的说明,参考出各种规范绘制出工艺流程图和本L-CNG加气站的平面布置图。

设计主要是根据实际情况进行工艺流程的设计,根据具体参数的计算进行工艺设备的选型。

设计结果可以当做实际生活中L-CNG加气站的部分说明。

本文的特色:根据情况进行原始参数的设定,符合实际生活中的工艺计算,切合实际,数据清晰,设备选型明确。

关键词:L-CNG;加气站;工艺流程设计;工艺参数计算

Abstract

The design to Huang Shi to design site, with the aid of references, network data and actual life investigation designed in this paper L - CNG stations process, according to the assumed conditions set parameters is introduced, the calculation and selection of L - CNG stations: the main equipment for LNG storage tanks, LNG charging machine, LNG, submersible pump, unloading supercharger and EAG LNG high pressure plunger pump, high pressure heater, evaporator and CNG gas bomb, CNG and qi activity, and sequence control panel, and so on, the equipment selection for LPG station design is of great significance. According to the process and combined with the description of the programming, the process and the arrangement of this L-CNG filling station are drawn according to various specifications.

Design is lain in the real circumstance of the process flow, following the real location of Huang Shi to calculate of process and equipment selection.

The explanation of L-CNG filling station in real life can apply those results.

The features of this paper: calculation and design of foundation following the original parameters, conforming the real process calculation, clear data, clear equipment selection.

Keywords:L-CNG ;Filling station ;Process flow design ; Calculation of process parameters

目 录

第1章 绪论 1

1.1 课题背景 1

1.2 建设L-CNG加气站的意义 1

1.3 国内外的发展现状 1

1.3.1 国内的发展现状 1

1.3.2 国外的发展现状 2

第2章 设计说明 3

2.1 概述 4

2.2 设计原则 4

2.3 站址选择 4

2.4 建站模式 5

2.5 设计规模 5

2.6 总平面设计说明 5

2.6.1 总平面布置说明 5

2.6.2 功能分区 6

2.6.4 站区绿化 6

第3章 工艺说明 7

3.1 卸车流程 7

3.1.1 卸车流程的判断 7

3.1.2 卸车方式的选择 7

3.1.3 卸车流程图 7

3.2 调压流程 8

3.3 LNG汽车加气流程 8

3.4 CNG汽车加气流程 8

3.4.1 CNG汽车存储装置 8

3.4.2 CNG汽车加气流程图 9

3.5 余气回收流程 9

3.6 工艺流程 9

第4章 设备工艺参数 10

4.1 LNG储罐 10

4.1.1储罐容积计算 10

4.1.2L-CNG加气站等级 10

4.2 LNG加液机 11

4.2.1 LNG加液机计算 11

4.2.2 LNG加液机参数 11

4.3 LNG潜液泵 12

4.3.1 LNG潜液泵的参数计算 12

4.3.2 LNG潜液泵的选择 12

4.4 高压柱塞泵 13

4.4.1 高压柱塞泵的计算 13

4.4.2 高压柱塞泵的选择 13

4.4.3 高压柱塞泵的确定 13

4.5 CNG加气机 14

4.5.1 CNG加气机计算 15

4.5.2 CNG加气机参数 15

4.6 气化器 15

4.7 EAG加热器 16

4.8 卸车增压器 16

4.9 顺序控制盘 17

4.10 储气瓶组 17

4.11 管路设计 17

第5章 安全管理 19

5.1 建筑安全 19

5.2 消防灭火器具及给水 19

第6章 结论 21

参考文献 22

致谢 23

第1章 绪论

1.1课题背景

随着交通运输业的发展,汽车运输成为当今时代城市运输中的主流,而环境保护是可持续发展的基础,LNG/CNG又是公认的一种廉价、高效、清洁、安全的车用燃料[2],LNG/CNG汽车的大量出现使得加气站的数量需要增加。L-CNG加气站较为特殊,其可同时为CNG和LNG两种汽车服务[3],其具有以下优点:

(1)占地面积小,同时可减小投资

(3)站厂的能耗低

(4)噪音小,对周围社区影响低

(5)充装速度快、不依赖管网

(6)设备绝热性能好,使用寿命长。

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图