登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 任务书 > 理工学类 > 新能源科学与工程 > 正文

废轮胎简化热解模型任务书

 2020-06-14 04:06  

1. 毕业设计(论文)的内容和要求

(1)查阅资料,了解国内外废轮胎处理与处置的现状,重点掌握废轮胎热处理的基本原理和方法,对废轮胎热解性进行概述,了解废轮胎以及其他块状物体热解模型,撰写文献综述。

(2)完成不少于3000汉字的外文文献翻译。

(3)利用反烧式废轮胎汽化炉进行实验。

剩余内容已隐藏,您需要先支付后才能查看该篇文章全部内容!

2. 参考文献

[1] 宁雷. 反烧式固定床废轮胎与生物质共热解实验研究[D]. 南京:南京工业大学,2013. [2] 李鑫. 废轮胎流化床热解特性研究[D]. 浙江:浙江大学, 2003. [3] 周龙,轮胎胶粉微波热解特性试验研究[D].山东:山东大学,2014. [4] 李琳. 废旧橡胶胶粉低温粉碎技术研究进展及趋势[J]. 再生资源与循环经济, 2011, 04(10):38-41. [5] 高雅丽. 回转窑废轮胎热解油的特性和用途分析及热解模型研究[M]. 浙江: 浙江大学,2003. [6] 李三平, 王述洋, 孙雪,等. 国内外生物质热解动力学模型的研究现状[J]. 生物质化学工程, 2013, 47(4):29-36. [7] 薛爱军, 潘继红, 田茂诚,等. 层式下吸式气化炉中单颗粒生物质的热解模型[J]. 林产化学与工业, 2016, 36(1):11-19. [8] 袁坤. 用于裂解废旧轮胎的实验炉的设计和实验研究[M]. 青岛:青岛科技大学,2016. [9] 闫大海. 废轮胎回转窑中试热解产物应用及机理和动力学模型研究[D]. 浙江大学, 2006. [10] TB Reed, B Levie, MS Graboski. Fundamentals, development and scaleup of the air-oxygen stratified downdraft gasifier[M]. The Biomass Energy Foundation Press, 1998. [11] Saravanakumar A, Haridasan T M, Reed T B, et al. Experimental investigation and modelling study of long stick wood gasification in a top lit updraft fixed bed gasifier[J]. Fuel, 2007, 17-18(86):2846-2856. [12] Soria-Verdugo A, Goos E, Arrieta-Sanagust#237;n J, et al. Modeling of the pyrolysis of biomass under parabolic and exponential temperature increases using the Distributed Activation Energy Model[J]. Energy Conversion amp; Management, 2016, 118(1):223-230. [13] Hu M, Chen Z, Wang S, et al. Thermogravimetric kinetics of lignocellulosic biomass slow pyrolysis using distributed activation energy model, Fraser#8211;Suzuki deconvolution, and iso-conversional method[J]. Energy Conversion amp; Management, 2016, 118:1-11. [14] Saravanakumar A, Haridasan T M, Reed T B, et al. Experimental investigations of long stick wood gasification in a bottom lit updraft fixed bed gasifier[J]. Fuel Processing Technology, 2007, 6(88):617-622.

3. 毕业设计(论文)进程安排

起讫日期 设计(论文)各阶段工作内容 2016.11.30-2016.12.23 任务书,选题审批表 2016.12.24-2017.01.13 文献综述、外文翻译、开题报告 2017.01.14-2017.04.19 进行废轮胎实验与建模分析 2017.04.20-2017.06.02 完成计算内容、论文写作 2017.06.03-2017.06.07 毕业论文和图纸等相应文件打印及装订 2017.06.08-2017.06.14 准备答辩

剩余内容已隐藏,您需要先支付 10元 才能查看该篇文章全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图