登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 机械机电类 > 车辆工程 > 正文

前装式垃圾车总布置设计毕业论文

 2021-09-09 09:09  

摘 要

随着城市现代化建设进程加快、人口的增长、经济的发展以及现在人们生活水平的不断提高,垃圾的总产生量不断增加,垃圾的成分也发生了很大的变化。生活垃圾为固液混合态,成分十分复杂,伴随降解中产生的臭味气体及腐蚀性的液体,严重影响着城市环境。垃圾对都市生活人群的危害越来越大,十分严重地影响着人们的健康。环境保护意识增强使得环卫机械产业快速发展,压缩式垃圾转运车在垃圾处理和转运中占有重要地位。

目前我国在压缩式垃圾车尤其是前装式垃圾车领域为一片空白,压缩式垃圾车主要为后装式和侧装式,尚无国产厂商生产前装式垃圾车。本文主要根据国为以及国内垃圾车的发展历史进程和现状,参考国外目前前装式垃圾车的主流车型参数,进行底盘选型并对车身总布置进行设计,该车型以压缩率高、二次污染小、转运效率高、无需下车操作为主要特点,本次设计以满足我国目前日益增长的垃圾转运及需求为主要目的,旨在改善当前国内的形势。

关键词:autoCAD,前装式垃圾车,总布置设计

Abstract

With the accelerated process of urban modernization, population growth, economic development and the continuous improvement of people's living standards, the output of domestic waste is increasing, and the composition of the garbage has also changed a lot. Garbage is more and more serious harm to human beings, and it is a serious threat to people's life and health. Garbage is mixed solid-liquid state, composition is complex and unstable, with explanation of odor and corrosion of leachate, a serious impact on the urban environment. Enhanced awareness of environmental protection makes the rapid development of environmental sanitation machinery industry, compression type garbage transfer vehicles in the garbage disposal and transportation occupies an important position.

At present, our country in the field of pre installed garbage trucks remaining vacancies, compression type garbage truck is mainly for the rear and side mounted, there is no domestic manufacturers to produce pre loaded garbage truck. In this paper, according to the garbage truck in foreign and domestic development history and present situation, refers to the domestic and foreign present mainstream before loading compression type garbage truck, selection of the chassis and the car body general arrangement design, the model to compress rate is high, little secondary pollution, high transfer efficiency, no need to get off operation as the main characteristics, the design to meet China's current growing refuse transfer and demand as the main purpose to improve the current situation of domestic.

Key Words:autoCAD、front loader garbage truck、chassis arrangement design.

目录

第1章 绪论 1

1.1研究背景及现状 1

1.1.1 我国城市垃圾处理背景 1

1.1.2城市生活垃圾集运模式 1

1.1.3国内垃圾车使用现状 2

1.2国内垃圾车研究概况 2

1.2.1无害化处理 2

1.2.2垃圾车的制造要求 3

1.2.3前装式垃圾车的优势 3

第2章 垃圾车发展历史及选型 5

2.1垃圾车发展历史 5

2.2 设计选型 5

第3章 垃圾车主要参数的选择 7

3.1 垃圾车设计任务,原则及目标 7

3.2 拟定方案 7

3.3整车形式的选择 7

3.4 垃圾车主要参数选择 9

3.5整车质量参数估算 12

3.6 垃圾车主要性能参数选择 14

3.7 垃圾车发动机主要性能指标的选择 16

第4章 总结 18

参考文献 19

致谢 20

第1章 绪论

1.1研究背景及现状

1.1.1 我国城市垃圾处理背景

目前我国城市化进程大大加快,随着人口增长和经济大幅度发展,生活垃圾带来的问题己经凸显出来。我国原本大量采用的旧式非压缩垃圾车及中转站己不能满足逐步提高的社会和个人生活对垃圾处理的要求。关于生活垃圾的无害化处理,由于城市用地的的不断扩大,选择垃圾处理填埋场的位置成为了当前垃圾处理行业的一大主要问题,目前国际上主流处理方法为在城郊结合部建立垃圾填埋场处理垃圾,这在一定程度上缓解了城市的垃圾带来的环境问题。但由于垃圾填埋场距离市中心大多较远,运输垃圾所需要的距离变长,使垃圾处理费用中,运输成本所占比重大大增加,在某些发达国家中甚至达到了80%左右。垃圾处理中,运输作为相当重要的一步,需要对其进行优化,并且,运输效率是运输优化的重中之重。

图1.1 垃圾综合处理简图

图1.1为当前垃圾处理的两种集运方式,一种是当距离大于一定临界值时,建立垃圾中转站进行集运;另一种是运用垃圾车将垃圾直接运输至垃圾处理点。由于中转站占地面积大并且城市用地现状十分紧张,不可能完全或主要采用中转站方式进行垃圾综合处理。目前我国主要城市大多采用上述的两种方式相结合的解决方法,保证较高的效率的同时维持较低成本,这也是国际主流应对方法和环卫设备发展的方向。

1.1.2城市生活垃圾集运模式

垃圾集运在不同国家有不同的处理方式,一般包括以下几种:

1、翻斗车集运。直接使用普通翻斗车运输垃圾,这种方式的主要问题在于垃圾装填量小,并且经常出现垃圾泄漏和液体渗漏现象,产生二次污染,并且实际使用中的综合成本高于其他垃圾车。

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图