登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 土木建筑类 > 给排水科学与工程 > 正文

湖北省黄州新区排水工程设计毕业论文

 2021-04-26 09:04  

摘 要

排水工程设计是城市规划不可或缺的一部分。本设计的任务是完成湖北省黄州新区的排水工程设计。排水工程涉及范围囊括:雨、污水管网工程与污水处理厂工程。

黄州新区位于湖北省东部,南隔106国道与白潭湖相连,北依余家潭、蔡家潭,从106国道向北延伸约1.5公里,东起谢家小湾,向东至杨鹰岭火车站,西抵三台河,服务面积约481.30公顷。设计地面地势较为平坦。

根据该区的实际情况,排水管网采用完全分流制系统。污水采用一根主干管,收集南北来向的污水,排入位于黄州新区西北部的污水处理厂进行处理,处理后水即排入三台河。雨水依据就近排放的原则,将整个市区分为七个部分,设置独立的雨水排出系统,将雨水分别排入余家潭、三台河。

根据流域特点和主导风向,污水处理厂定址于黄州新区的西北部,近期规模为1.2万m3/d,远期规模为2.4万m3/d。根据处理水特点和出水水质要求,采用一级B处理要求,核心生物处理工艺选择A2/O法同步脱氮除磷工艺,主要工艺流程为中格栅→提升泵房→细格栅→沉砂池→缺氧池→厌氧池→好氧池→二沉池→消毒池→出水。

根据所提供的原始资料,我在本设计中完成了黄州新区排水管道系统、污水处理厂构(建)筑物的设计计算,绘制图纸6张(A1,包括一张墨线图和手画图),完成说明书、计算数各一份。

关键词:黄州新区排水工程、分流制排水系统、二级处理、A2/O法

Abstract

Drainage engineering design is an integral part of urban planning.The design task is to complete the drainage engineering design in Huangzhou New District in Hubei Province.Drainage works involved include: rain, sewage pipe network engineering and sewage treatment plant works.

Huangzhou New District is located in the eastern part of Hubei Province,south of 106 National Road and White Lake Lake connected to the north by Yujiatan,Cai Jiatan,from 106 National Road to the north extension of about 1.5 km east of Xie Jia Xiaowan,east to Yang Yingling train Station, west of Santai River,the service area of about 481.30 hectares.Design ground terrain is relatively flat.

According to the actual situation of the area,the drainage network adopts the complete divergence system.Sewage using a trunk pipe,collecting north and south of the sewage,into the the sewage treatment plant for treatment in the northwest of Huangzhou New District,then the water treated will be discharged into the Santai River.Rainwater was collected based on the principle of the nearest discharge,the entire urban area is divided into seven parts,setting up an independent rainwater discharge system,the rain were discharged into Yujiantan、Santai River.

According to the characteristics of the basin and the dominant wind direction,the sewage treatment plant is located in the northwest of Huangzhou New Area,with a scale of 12000 m3 / d and a long-term scale of 24000m3/d.According to the characteristics of wastewater and water quality requirements,we use of a B processing requirements,the core biological treatment process was A2/O process,the main process was:the grid →the pumping station→fine grille→grit chamber→anoxic tank→Anaerobic tank→aerobic pool→secondary sink pool→disinfection pool.

According to the original information provided,I’ve completed the design of the Huangzhou New District drainage pipe system,sewage treatment plant (building) building design and calculation,6 drawing drawings (A1,including a handwriting and hand drawing),complete the specification, calculation sheet.

Key words:Huangzhou New District Drainage Project,Diversion System Drainage System,Secondary Treatment, A2 / O Method

目 录

摘 要 3

Abstract 4

第1章 绪论 1

1.1 设计任务 1

1.2 设计成果 1

第2章 设计说明书 2

2.1 设计原始资料 2

2.1.1 城市概况 2

2.1.2 自然条件 2

2.1.3 排水现状 3

2.2 排水方案设计 3

2.2.1 排水体制的选择 3

2.2.2 污水管网设计 3

2.2.3 雨水管网设计 3

2.3 污水处理设计 4

2.3.1 污水处理工艺的选择 4

2.3.2 工艺流程的确定 4

2.3.3 污水处理构筑物 4

2.4 污泥处理设计 6

2.4.1 污泥处理基本方案 6

2.4.2 污泥处理构筑物 6

2.5 污水厂附属构筑物 6

2.5.1 面积规划 6

2.5.2 水厂定员 6

2.5.3 附属构筑物 7

2.6 污水厂的总体布置 8

2.6.1 污水厂平面布置 8

2.6.2 污水厂高程布置 8

2.7 排水工程总投资估算 8

2.7.1 排水管道工程投资估算 8

2.7.2 污水厂工程投资估算 8

设计计算书 9

第3章 城市排水方案的确定及计算 9

3.1 排水系统体制的选择 9

3.2 污水管网设计 10

3.2.1 设计要点 10

3.2.2 设计流量 12

3.2.3 水力计算 14

3.3 雨水管网设计 16

3.3.1 管网定线 16

3.3.2 水力计算 17

第4章 城市污水处理方案的确定 19

4.1 污水处理方案选择原则 19

4.2 污水工艺流程选择 19

4.3 污水处理构筑物的选择 21

4.3.1 格栅 21

4.3.2 沉砂池 21

4.3.3 二沉池 22

4.3.4 消毒阶段 23

4.3.5 污泥浓缩脱水 25

4.3.6 计量设施 27

第5章 污水厂主体构筑物设计计算 28

5.1 设计原始资料 28

5.1.1 规模 28

5.1.2 设计流量 28

5.1.3进出水水质 28

5.2 泵前中格栅设计计算 29

5.2.1 设计要点 29

5.2.2 设计参数 29

5.2.3设计计算 29

5.3 污水提升泵房的设计计算 31

5.3.1 设计要点 31

5.3.2 设计参数 31

5.3.3设计计算 31

5.4泵后细格栅的设计计算 35

5.4.1设计参数 35

5.4.2设计计算 35

5.5 沉砂池的设计计算 36

5.5.1 设计要点 36

5.5.2 设计参数 37

5.5.3 设计计算 37

5.6 A2/O反应池设计计算 38

5.6.1 设计要点 38

5.6.2 设计参数 39

5.6.3 设计计算 40

5.7 二沉池的设计计算 50

5.7.1 设计要点 50

5.7.2 设计参数 52

5.7.3 设计计算 52

5.8 综合井的设计计算 57

5.8.1 设计要点 57

5.8.2设计参数 57

5.8.3设计计算 57

5.9 紫外线消毒 58

5.9.1 设计参数 58

5.9.2 设计计算 58

5.10 计量设施设计计算 60

5.10.1 设计参数 60

5.10.2 设计计算 60

5.11 污泥处理的设计计算 62

5.11.1 设计计算 62

第6章 污水厂附属构筑物设计计算 64

6.1 水厂总体面积的规划 64

6.2 水厂定员 64

6.3 水厂各构筑物及附属构筑物平面面积 65

第7章 污水处理厂的总体布置 67

7.1 污水处理厂平面布置 67

7.1.1 平面布置原则 67

7.1.2 污水厂平面布置 67

7.2 污水处理厂高程布置 68

7.2.1 高程布置原则 68

7.2.2 污水厂高程布置 69

第8章 排水工程总投资估算 73

8.1 排水管道工程投资估算 73

8.2 污水厂工程投资估算 73

8.3 远期规划附加投资估算 73

第9章 总结 74

第10章 参考文献 75

第11章 附录 77

第12章 致谢 91

第1章 绪论

1.1 设计任务

接受毕业设计任务的学生应在规定的时间内完成湖北省黄州新区排水工程设计。

排水工程设计范围包括:雨、污水管网工程与污水处理厂工程。

1.2 设计成果

1、毕业设计说明书(附计算书)

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图