登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 土木建筑类 > 给排水科学与工程 > 正文

湖北省黄石某镇排水工程设计毕业论文

 2021-04-04 11:04  

摘 要

水资源是经济可持续发展基本保证,污水的任意排放或处理不彻底的排放,都会给环境带来严重的污染问题

黄石市位于湖北省东南部,作为湖北省重要的老工业城市,为创建全国文明城市,黄石市愈发重视污水的收集和处理,对雨污水的收集、处理和排放问题也随之突出,故而新建城区的污水和雨水排放已成为迫在眉睫的大事。基于上述原因,本设计在黄石市水文地质、受纳水体水质资料、人口分布和气象条件的情况下,对包括排水雨水管网和污水处理厂的整套排水设施进行设计。其中,对进水水质、出水水质进行分析,污水处理厂污水及污泥处理工艺流程的选择给予详细的对比说明,对具体污水及污泥构筑物结构进行了详细计算。

关键词:污水处理 A2O工艺 污泥处理

Abstract

   Water resources are the basic guarantee for economic sustainable development. Any discharge of sewage or incomplete treatment will cause serious environmental pollution problems.

    Huangshi City is located in the southeast of Hubei Province. as an important old industrial city in Hubei Province, Huangshi City pays more and more attention to the collection and treatment of sewage in order to establish a civilized city in China, and the problems of collection, treatment and discharge of rain sewage are also prominent. Therefore, the sewage and Rain Water discharge in the new urban area has become an urgent event. Based on the above reasons, this design designs a complete set of drainage facilities, including drainage Rain Water pipe network and sewage treatment plant, under the condition of hydrogeology, receiving water quality data, population distribution and meteorological conditions in Huangshi City. Among them, the influent quality and effluent quality are analyzed, and the sewage and sludge treatment process of sewage treatment plant is carried out. The selection of the process is compared and explained in detail, and the specific sewage and sludge structure are calculated in detail.

Keywords: sewage treatment A2O process sludge treatment

目 录

设计说明书

第一章概述

1.1设计规范及依据…………………………………………………5

1.2设计原则…………………………………………………………5

1.3 设计范围…………………………………………………………6

第二章城镇概况

2.1自然条件…………………………………………………………6

2.2城镇概况…………………………………………………………8

第三章污水收集系统

3.1 排水体制及排水系统……………………………………………9

3.2 收集系统布局方案………………………………………………10

3.3.污水管网设计原则及选择………………………………………10

3.4雨水管道设计原则及布置………………………………………12

3.5污水收集系统设计………………………………………………13

3.6雨水管网系统设计说明…………………………………………16

第四章污水处理厂工艺方案

4.1厂址选择…………………………………………………………19

4.2进水水质…………………………………………………………20

4.3污水处理工艺方案………………………………………………20

4.4污水生物脱氮除磷工艺+深度处理工艺选择…………………24

4.5污泥处理工艺方案………………………………………………26

4.6污水处理厂污泥的处置方案……………………………………28

4.7回用水处理工程…………………………………………………29

4.8消毒技术方案……………………………………………………29

4.9化学除磷工艺方案………………………………………………30

4.10污水处理厂污水、污泥处理系统工艺流程……………………30

4.11构筑物选择………………………………………………………30

4.12污水处理厂各构筑物设计说明…………………………………33

第五章污水处理厂

5.1 污水处理厂平面布置……………………………………………37

5.2污水处理厂高程布置……………………………………………37

5.3各构筑物高程设计…………………………………………………37

5.4厂区道路围墙设计………………………………………………38

5.5 厂区管道设计……………………………………………………38

设计计算书

1水量与水质…………………………………………………………39

2中格栅的设计………………………………………………………40

3提升泵房的设计……………………………………………………40

4细格栅………………………………………………………………41

5 沉砂池………………………………………………………………42

6生化池设计计算……………………………………………………43

6.1设计参数…………………………………………………………43

6.2好氧区设计计算…………………………………………………44

6.3缺氧区设计计算…………………………………………………45

6.4厌氧区设计计算…………………………………………………46

6.5反应池尺寸计算…………………………………………………46

6.6曝气系统计算……………………………………………………47

6.7空气管道系统的计算……………………………………………48

6.8厌氧池设备选择…………………………………………………50

6.9缺氧池设备选择…………………………………………………50

7 二沉池………………………………………………………………50

7.1池体设计…………………………………………………………50

7.2其他设计…………………………………………………………51

8 消毒设施计算………………………………………………………53

9 化学除磷……………………………………………………………56

10污泥处理设计计算…………………………………………………56

11浓缩脱水车间………………………………………………………58

11.1污泥浓缩…………………………………………………………59

11.2污泥脱水…………………………………………………………59

12计量槽设计计算……………………………………………………60

13高程计算……………………………………………………………61

14工程经济估算………………………………………………………63

14.1 设计计算原则……………………………………………………63

14.2污水处理成本……………………………………………………63

15 附表

15.1 污水管网设计流量表……………………………………………65

15.2 污水管网水力计算表……………………………………………74

15.3 雨水管网汇水面积表……………………………………………91

15.4 雨水管网水力计算表……………………………………………95

致谢……………………………………………………………………105

参考文献………………………………………………………………106

第一章 概述

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图