登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 开题报告 > 机械机电类 > 车辆工程 > 正文

小轿车除霜除雾系统设计及性能分析开题报告

 2021-03-24 11:03  

1. 研究目的与意义(文献综述)

1.1 background, purpose and meaning.
the safety of the car has always been avery significant part of the car design process. in the northern region ofchina, the phenomenon windshield frost fog seriously affect the driver's visionwhen driving. the formation of fog is mainly due to the lower externaltemperature, the passenger breathing the steam generated in the windshieldcondensation to form a layer of water film -. if the external temperature is long below zero, thetemperature of the inner surface of the windshield is also lower than zero, sothat the water molecules on the inner surface of the windshield are cured toform a f. another reason for frosting is the heat generated bythe passengers make the snow accumulated on the outer surface of the windshieldquickly melts, and because the external temperature is very low, the meltedsnow is quickly frozen on the windshield. it is well known that adequatevisibility through the vehicle windshield over the entire driving period is ofparamount practical significance. therefore, people attach more and moreattention on the air conditioning defrosting performance. a well-designeddemisting device will help to eliminate this fog layer within very short spanof time and brings an accepted level of visibil.

an attempt is made here to design and develop a demistingdevice for a commercial vehicle with the help of numerical and analyticalapproach and later on validated with experimental results. system configurationwas finalized by analytical method followed by 3d (dimensional) modeling incatia. steady and transient computational fluid dynamics (cfd) analyzes wereperformed in star-ccm to analyze and predict the efficiency of defrostdefogging devices. and then on the basis of the results to find out theexistence of the device defects and optimize the windshield defrostingperformance.

剩余内容已隐藏,您需要先支付后才能查看该篇文章全部内容!

2. 研究的基本内容与方案

2.1 the basic content of the design
the design is the car defrosting system design and performance analysis, themain contents are as the followings:
(1) defrost and defrost system piping overall size design;
(2) key components such as fan and other parameters to determine;
(3) 3d model and cfd model construction;
(4) defrosting fog characteristics simulation analysis;
(5) the preparation of calculation instructions.

2.2 design goals

剩余内容已隐藏,您需要先支付后才能查看该篇文章全部内容!

3. 研究计划与安排

(1) 7th semesters 19,20 weeks: determinethe graduation design topics, graduation design task book (related parameters),school data collection.
(2) 8th semesters Week 1: program ideas, literature search, complete theopening report.
(3) 8th semester 2-3 weeks: off-campus internship, school data collection,complete the internship report.
(4) 8th semester 4 weeks: foreign language translation, data re-collection.
(5) 8th semesters 5 to 7 weeks: design calculations, sketching.
(6) Week 7: mid-term reply.
(7) 8th semester 8 to 10 weeks: drawing, writing design calculation manual(paper).

4. 参考文献(12篇以上)

[1] park, wg (park,warn-gyu); han, mc (han,myung-chul); jang, kl (jang, ki-lyong).automatic demisting control of automobile windscreen glass [j], 2007, 01,0954-4070.

[2] choon-gyu kwon, ki-lyong jang, chang-won lee,seung-gyoon jung, lee foster.development of an automatic windshield defoggingsystem, sae 2009-01-0173, 2009.

[3] lee, jh (lee, jeong-hoon); oh, sh (oh,sang-ho); oh, sw (oh, se-won); kim, ks (kim,kyung-soo); kim, sh (kim,soo-hyun). an effective control ofauto defog system to keep automobile windshield glass clear, ieee,2010.

剩余内容已隐藏,您需要先支付 10元 才能查看该篇文章全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图