登录

  • 登录
  • 忘记密码?点击找回

注册

  • 获取手机验证码 60
  • 注册

找回密码

  • 获取手机验证码60
  • 找回
毕业论文网 > 毕业论文 > 交通运输类 > 道路桥梁与渡河工程 > 正文

中尼公路A段设计毕业论文

 2021-07-13 12:07  

摘 要

本次毕业设计的题目是中尼公路A段设计,公路等级为二级公路,设计速度是60km/h。本设计依照“安全性、舒适性、经济性”的原则,参照国家相关的技术规范进行设计。完成的主要设计内容包括:路线方案选择、平面设计、纵断面设计、横断面设计、路基边坡防护、路面结构设计、路基排水设计。本次设计路线的长度大约为8.5公里,利用纬地三维道路辅助设计软件进行公路线形设计,其平面线形中有13个交点。部分路基设置了挡土墙,挡土墙的设计验算采用里正岩土工程软件完成。该路段做沥青混凝土路面设计,其路面结构厚度设计借助路面设计软件HPDS2011完成。设计成果主要包括路线平面图、路线纵断面图、路基横断面图、路面结构图、圆管涵设计图、直曲转角表、逐桩坐标表、路基设计表、路基土石方数量表等。

关键字:二级公路;线形设计;路基设计;路面设计

Abstract

The title of graduation design is the design of Sino-Nepalese Highway’s A part, and the highway grade is a Secondary road. The speed of highway is 60km/h. The design is in accordance with national norms ,with the principle of "safety, comfort, economy". The main design content include road line project selection, graphic design, the design of the vertical section , cross-sectional design, embankment slope protection, structural design of the road, embankment and drainage design. The length of the route is about 8.5 km. The alignment of highway is designed by using the three-dimensional CAD software, and there are 13 intersection points in the routes. Part of roadbed requires retaining protection and the retaining wall is checked by using Lizheng Engineering Calculation software. This section is designed with asphalt concrete pavement. Pavement thickness design is completed by means of pavement design software HPDS2011. Results of the design include maps of road line project selection, graphic design, the design of the vertical section, cross-sectional design, pavement structure figure, circular pipe culvert design ,straight lines and curves corner table, coordinates of stakes on table , roadbed design table,the number of embankment of earth and stone table and so on.

Key words: second-class roads; alignment design; subgrade design; pavement design

目 录

绪论 1

第1章 工程概况 2

1.1设计所需的基础资料 2

1.2公路等级和技术标准论证 3

1.2.1公路等级论证 3

1.2.2技术标准论证 5

第2章 路线平面设计 7

2.1道路选线定线 7

2.1.1选线的原则 7

2.1.2选线的步骤 7

2.2平面设计 8

2.2.1直线 8

2.2.2圆曲线 8

2.2.3缓和曲线 8

2.2.4平面组合线型 9

2.2.5平曲线要素的计算 10

第3章 路线纵断面设计 12

3.1纵断面设计步骤 12

3.2纵坡设计 13

3.2.1设计的基本原则 13

3.2.2拉坡 13

3.3竖曲线设计 13

3.3.1半径的选择 14

3.3.2竖曲线要素的计算 15

第4章 路基横断面设计 17

4.1横断面设计基本要求 17

4.1.1平曲线加宽 17

4.1.2超高 18

4.2横断面设计 18

4.3路基边坡防护 18

4.4挡土墙设计 19

4.4.1仰斜式路堤墙的设计验算 19

4.4.2 仰斜式路肩墙的设计验算 20

5.1路面结构组成 22

5.1.1面层 22

5.1.2基层 22

5.1.3垫层 22

5.2路面设计步骤 22

5.3路面结构设计 23

5.3.1轴载分析计算 23

5.3.2方案一的结构层厚度计算 24

5.3.3方案二的结构层厚度计算 25

5.3.4两种路面结构方案的比选 26

第6章 排水设计 28

6.1公路排水设计的内容 28

6.2路基排水设计 28

6.2.1地表排水设备 28

6.2.2边沟设计 28

6.2.3排水沟设计 29

6.3路面排水设计 29

6.4涵洞设计 29

6.4.1基本要求 29

6.4.2圆管涵设计 30

结论 31

参考文献 32

附录 33

致谢 34

绪论

公路设计是在所提供的地形图中,充分考虑当地的地形、地物条件的情况,结合各种相关规范而进行的道路综合设计。其主要内容包括道路的平面、纵断面、横断面设计、路基设计、路面结构设计、排水设计等。通过对中尼公路A段公路设计的研究与探索,我掌握了道路设计过程的基本原则,熟悉了道路设计的相关设计规范,提高了综合运用专业知识的能力,也使我对道路设计行业的工作有了一定的理解和认识。在指导老师的带领下,我已初步理解并掌握了一定的专业知识和技能,能够为今后的工作和自身的发展奠定良好的基础。

本次设计中的主要任务是:

1、根据所提供的中尼公路地形图(1:2000)以及基本的技术资料,按照公路线形设计方法,严格依据相关规范进行道路路线设计(平面、纵断面和横断面)。

您需要先支付 80元 才能查看全部内容!立即支付

企业微信

Copyright © 2010-2022 毕业论文网 站点地图